Cantilever crane LJXJ300
1. This vacuum glass lifter is for handling insulating glass sheet.
2. This glass lifter is able to lift the glass sheet with 800kg
3. It is equip with 5 suckers. But the sucker can be add according
to need of the client.
4. The equipment is Stable, Easy to use and safe.
5. The vacuum lifter is equipped with a warning light in case of a
power failure or vacuum leakage, an optical and an acoustic signal
goes off immediately to warn the operator to do emergency
operation.
Parameter:
| Safety-absorption | 200KG/400kg/600kg/800kg |
| Performance | Rotation 0-90 degree and lifting 600-1200mm |
| Quantity and size of sucker | 2/4/6/8 |
| Working gas source | 5-8 Pa |
| Outer size | L 1120xW660XH620mm |
| Net weight | 550kg |
Useing For
- Insulating Glass Production line,
- Installing Glass Curtain Wall System,
- Loading and Unloading glass sheet on glass cutting table,
- Instaling car windscreen.
Glass Washing Machine LJLBQJ2500
Structural characteristics:
* The rest of the sheet metal parts are sprayed with advanced
mechanical paint or powder；
* Aluminum alloy assembled structure, no scrap concept, permanent
use,high efficiency, energy saving 70% efficiency；
* The rubber roller is made of vulcanized rubber with stainless
steel shaft；
* The washing part in contact with water is made of stainless
steel；
* Cleaning department, wind staff overall lift, the maximum lift:
350mm,easy to clean and maintain；
* Three pairs of brush(Ø150mm)Stainless steel shaft configuration
(low-e glass, ordinary coated glass and sunshine coated glass can
be washed without damaging the coated surface)；
* Two pairs of special stainless steel aluminum alloy air knife
configuration, strong wind, good air drying effect, with heating
system(with temperature control device, optional opening and
closing)；
* The fan is equipped with air filter in the air inlet chamber,
with large air volume and good air drying effect,The whole fan box
is installed in the upper part of the workshop, with the air filter
screen on the side for easy inspection and cleaning；
* Main drive for gear transmission, frequency control, digital
display , the rotation of the brush roller in the washing section
is driven by independent belts of the upper and lower motors
respectively, the frequency conversion adjustment speed is
stable,the service life is long, realizes the cleaning high request
special glass；
* Mechanical button control, cleaning machine digital display, easy
to operate, easy to operate, easy to maintain；
* Washing machine water tank outside, convenient water tank
cleaning, water change, check, so that the washing machine cleaning
effect is cleaner.
* Optional with PLC control, touch screen display.It is convenient
for workers to operate and maintain, and can be connected to all
manufacturers of edge grinding machines without gap.(purchase
separately if necessary)
Main feature:
• Using 6 pieces of soft brushes
• Wash online and offline low-e glass, automatically recognizes Low-e
film
• Washing part adopts the design of upper and lower layered structure
• Adopt variable frequency fan, energy efficient, good cleaning
effect
• The air knife can automatically adjust the width of the air knife
according to the thickness
• Using intelligent intermittent energy-saving working methods
• Hierarchical type washing system
• Water tank automatic temperature control, water replenishing system
• European silencer system
• 304 stainless steel materials
