ISO 2 Ton Free Standing Column Jib Crane Price In Steel Machining
Workshop
Product presentation
Column mounted jib crane is a kind of crane that fixed on the
ground. Its operation area is circular due to its has a rotatable
cantilever. Combined with hoist unit like electric hoist, chain
hoist, chain block, it can realize transportation of cargos in its
coverage.
Jib crane is lifting equipment to do light weight transport in
plants, port, wharf and etc. sometimes it can be used in
manufacturing line and assembling line to do jobs need to be fixed
position accurately.
You can purchase two types of cantilever jibs. If you want to carry
heavy loads under 20 tons, you can choose heavy duty cantilever jib
crane. And you can choose cantilever jib crane if you need to
transport loads under 5 tons. Both of them are quiet applicable for
short distance and busy work.
Crane install
1 . Column installation:
Lift the column vertically. Set all bolts in foundation right
through bolt holes on bottom flange of the column. Then adjust
column verticality and tighten all nuts.
2. Arm/jib/cantileverinstallation:
Before installation, lifting hoist should be installed on the
arm/jib/cantilever and fixed.
Aligning shaft of column to turntable hole at end of jib/arm, then
assemble arm and column together slowly.
After parts are in place, tighten the fixing bolts. Then install
the power supply ring.
Test beam rotation with a rope and rotating should be flexible
without jamming and abnormal phenomenon.
3. Drive unitinstallation:
Make cycloid reducer match with ring gear on column. Make sure that
drive gear meshes with large ring gear, then fixed the reducer to
flange by bolts.
Speical features:
360° of uninterupted movement
Easy pod station installation
Maximum trolley travel
Horizontal level adjust
Vertical level adjust
Voltage lower protection function
Lifting height limit device
Emergency stop system
Crane traveling limit switch
Overload protection device
Technical parameters
| Model | BZ0.5 | BZ1 | BZ2 | BZ3 | BZ5 |
| Lifting capacity | T | 0.5 | 1 | 2 | 3 | 5 |
| Max. Lifting height | M | 3 | 3 | 3 | 4 | 4 |
| Max. Horizontal throw | M | 2.6 | 3-4 | 2.9-3.9 | 3.8 | 3.7 |
| Max. Radius of gyration | M | 3.6 | 4-5 | 4-5 | 5 | 5 |
| Max. Rotation moment | T/M | 3 | 6 | 12 | 18 | 27 |
| Angle of revolution | Degree | 360 |
| Lifting speed | Normal | m/min | 8(4) |
| Slow | m/min | 0.8(0.4) |
| Traveling speed | m/min | 20 |
| Angle of revolution speed | m/min | 1 | 0.75 | 0.7 | 0.9 | 0.6 |
Application
According to your needs, we carry out professional customization,
enquiries to provide technical parameters:
1. The capacity: _____ton.
2. The lifting height: ____m.
3. The arm length: ___m.
4. The power supply: ____P____V____Hz.
5. The working condition?
6. The crane, informs the for?
Packaging and shipping
