Loading / Unloading 0–46 M/Min. Rack And Pinion Lifter
Rack And Pinion Lifter Main characteristics
1. Construction hoist, is also called construction lifter,
construction elevator, construction lift, building lifter, building
hoist, building lift, building elevator, etc.
2.construction hoist (construction elevator/construction lifter)
adopts rack and pinion transmission based on domestic and foreign
advanced technology, through many years of innovation and
development.
3.. Mast section can be divided into three specifications as
follows: 650x650x1508, 800x800x1508 and 960x650x1508.
4.. Driving mode: SCD dual drive, counter weight, no counter weight
of SC triple drive, built-in, upper-setting and frequency control
etc.
5. construction hoists (construction lifters/construction
elevators) are applicable to bridges, chimneys, buildings and many
other projects.
Rack And Pinion Lifter Design
It is the truly modular rack and pinion hoist design, so the
elevator drive devices and cars are generic and interchangeable.
Rack And Pinion Lifter Production and Materials
KANGBO implements the true modular design of rack and pinion
hoists, standardization and fine finishing of lifts parts and spare
parts, and assembly line production. The material elevator
components are versatile and universal.
Features and Advantages
* The material hoist runs without vibration or trembling. The man
and material lift starts and stops without surging or jerking.
Rack And Pinion Lifter Parameters
| Technical Data | KP-B07, B08 Rack And Pinion Lifter |
| Payload Capacity | 2,000 kg |
| Lifting Speed | 0–46 m/min. |
| Max. Lifting Height | 450 m |
| Cage Width (internal) | 1.5 m |
| Cage Length (internal) | 3.2 m |
| Cage Height (internal) | 2.35 m |
| Motor Control | Frequency Control |
| Engine Power | 2x15 kw |
| Gearbox | Helical Gearbox of KANGBO Make |
| Safety Device | Centrifugal Brake |
| Power Supply Range | 380–500 V, 50 or 60 Hz, 3 phase |
| Mast Section | Square column 650*650*1508 mm with bolted rack |
| Rack Module | 8 |
