Energy Saving 3000Kg Rack And Pinion Hoist
Rack And Pinion Hoist Introduction
1, Conversion driving smooth starting, high efficiency and energy
saving, low energy consumption and environmental protection, low
mechanical wear and tear;
2, Optional for single cage and twin cage, without counter weight;
3, Optional for kinds of tie-in type;
4, Low durability of materials : strength of high strength steel is
increased and reduced the weight of hoisting cage;
5, Many other optional configuration and function.
Rack And Pinion Hoist Production and Materials
KANGBO implements the true modular design of rack and pinion
hoists, standardization and fine finishing of lifts parts and spare
parts, and assembly line production. The material elevator
components are versatile and universal.
Main structure frame are made of 16Mn and Q345 high strength cold
roll steel plate, cut by laser, process by CNC machines in tool
fixtures, welded by robots.
The construction lift cage roof is made by a full steel plate, and
the edges are totally welded, to ensure no water leakage and high
strength.
Rack And Pinion Hoist Parameters
| Item & Article No. | SC300BG, KP-B15; SC300/300BG, KP-B16 |
| Payload capacity | 3,000 kg |
| Lifting speed | 0–60 m/min. |
| Max. lifting height | 250/400 m* |
| Cage width (internal) | 1.5 m |
| Cage length (internal) | 3.2 m |
| Cage height (internal) | 2.35 m |
| Motor control | Frequency Control |
| Engine power | 3x23 kw |
| Gearbox | Helical reducer |
| Safety device type | centrifugal brake |
| Power supply range | 380–500 V, 50 or 60 Hz, 3 phase |
| Mast Section | Square column 650*650*1508 mm with bolted rack |
| Rack module | 8 |
