Steel Plate FC Motor Control Building Site Hoist
Building Site Hoist Production advantage:
1. Adopting advanced technology both at home and abroad,SC series
construction elevator is novel in design,resonable in
structure,simple in operation,covenient in assembly and
disassembly,safe and reliable in working.
2. The unit incorporates famous brand electric components and main
parts in transmission mechanism.The steel structure is made of
high-quality steel material and welded with CO2 gas shield
welding.Surface paint is made with imported raw materials in
brmiant ,long lasting colors.
3. The unit is provided with reliable safety interlock
devices,safety switch,breakage protection switch,upper and lower
limits and limit switches ,etc,Progressive dropping safety devices
and safety protection hook are provided.
4. The safety design and configuration fully comply to national
standards.
Building Site Hoist Standard Configuration
There is a small crane for conenient assembly of the construction
lift.
Available in single or twin hoist cage configuration.
Manual or Automatic Controls of the hoist is optional.
Lighting inside construction elevator car is LED ceiling lamp
The construction material hoist cage roof doors are equipped with
Interlock.
Equipped with hoist drop test facility with remote control.
A frequency control unit (FC), with closed-loop, be equipped.
Building Site Hoist Optional equipment
An intelligent elevator control system, Multi-function Control
System, with functions of fault detect, display and alarm, and
automatic cage landing/stop and floor selector, is available.
Automatic greasing machine for rack and pinion elevator is
availble.
Multi-function Control System of fault detect, display and alarm,
and automatic cage landing/stop and floor selection is available.
Building Site Hoist Technical Data
| Item & Article No. | SC320(BZ) KP-B17, SC320/320(BZ) KP-B18 Building Site Hoist |
| Payload capacity | 3,200 kg per cage |
| Lifting speed | 0–46 m/min. |
| Max. lifting height | 450 m |
| Cage width (internal) | 1.5 m |
| Cage length (internal) | 3.2 m |
| Cage height (internal) | 2.35 m |
| Motor control | FC control |
| Engine power | 3x15 kw per cage |
| Gearbox | Helical reducer |
| Safety device type | centrifugal brake |
| Power supply range | 380–500 V, 50 or 60 Hz, 3 phase |
| Mast section | square column 650*650*1508 mm with bolted rack |
| Rack module | 8 |
