Helical Gearaboxes 450 M Construction Material Hoist
Construction Material Hoist Description
The load capacity of building hoist can reach 3200kgs; the lifting
speed can reach 96m/min, and the max height can be as high as 450m.
The hoists are widely used in construction site, power projects,
metallurgical, mining,oil and chemical industries. Hollisworth also
can design and produce the specialkinds of lifting equipments upon
the clients; requirements or special condition on the working site.
Production and Materials
KANGBO implements the true modular design of rack and pinion
hoists, standardization and fine finishing of lifts parts and spare
parts, and assembly line production. The material elevator
components are versatile and universal.
The construction material elevator structural parts are made of
16Mn and Q355B high strength steel.
The construction lift cage roof is made by a full steel plate, and
the edges are totally welded, to ensure no water leakage and high
strength.
Construction Material Hoist Configuration
There is a small crane for conenient assembly of the construction
lift.
There is additional 'C' door at the long side of cage for
convenient loading/unloading is available.
Available in single or twin hoist cage configuration.
The construction rack and pinion elevators are Variable Frequency
Drive (VFD), with low starting current and much less wear and tear,
very smooth starting and stopping.
Manual or Automatic Controls of the hoist is optional.
There is LED lighting inside construction elevator car.
Construction Material Hoist Technical Data
| Item & Article No. | SC200BD, MP-B05; SC200/200BD, MP-B06 |
| Payload Capacity | 2,000 KG per Cage |
| Lifting Speed | 0–36 m/min. |
| Max. Lifting Height | 450 m |
| Cage Size (internal) | 3.2(Length)*1.5(Width)*2.35(Height) Meter per Cage |
| Cage Doors | 3 doors, Entry Door + Exit Door + Side Door |
| Motor Control | FC (Frequency Control) |
| Engine Power | 2x11 KW per Cage |
| Gearbox | Helical Gearbox |
| Safety Device Type | Centrifugal Brake |
| Power Supply Range | 380–500 V, 50 or 60 Hz, 3 Phase |
| Type of Mast | Square Column 650*650 mm with Bolted Rack |
| Length Mast Section | 1.508 m |
| Rack Module | 8 |
