Digital Display Flow Tester 1.0 Mm Medical Device Testing Equipment

Medical device flow tester

Medical device flow tester adopts 5.7 inch (320 * 240) LCD touch screen and Chinese menu display. The menu on LCD screen is controlled by keyboard, and test results can be printed by airborne printer. According to the relevant provisions of the national standards for medical devices, the special equipment designed for testing the flow of medical devices. Configuration requirements: main engine + 6mm standard gas pipe 6m 2.3 pressure output range: higher than local atmospheric pressure, 10KPA ~ 200KPa, display mode: LED digital display; pressure output value can be set arbitrarily, calibration error is not more than ± 2.5% of the reading. Test duration: 5 seconds ~ 99.9 minutes, LED digital display, the error is not more than ± 1s. It is suitable for infusion set, blood transfusion set, infusion needle, catheter, anesthesia filter, etc.
When the test is conducted according to Appendix B of YY 0285.5, the flow rate of conduit with nominal outer diameter less than 1.0 mm shall be 80% to 80% of the value marked by the manufacturer
The flow rate of conduit with nominal outer diameter greater than or equal to 1.0 mm shall be 90% - 115% of the value indicated by the manufacturer
Net weight: 11kg overall dimension: 400 × 290 × 240 (mm)

Partial list:
1. One mainframe

2. One year warranty

3. One roll of printing paper

4. Operation instructions
5. The instrument will be upgraded free of charge according to the national standard

Shanghai kerang technology co., ltd is located in Shanghai City, China, and was established in 2018.It is a company specializing in the field of automation technology: technology development, technology transfer, technical consultation and technical service; installation, design, commissioning and maintenance of automation equipment; and other high-tech enterprises. And have strong R & D capabilities in the field of test instrument industry. The testing equipment developed by the company is widely used in many industries such as electronics, home appliances, etc.

We have strong technical reserves and solid technical strength, especially in the field of environmental testing equipment or product online monitoring. The newly developed products are used in aerospace, aerospace, nuclear industry and other projects.

Looking forward to your inquiry and negotiation.