Stadium IP65 120W 240W 360W High Lumen LED Flood Light
high lumen LED flood light 960w, optic lens 20 degree,163200lumen,
IP66, 170lm/w
Hotsell Stadium light 120W 240W 360W 480W 600W 720W 960W 1200W
1500W
* More suitable for stadium.
* IP65 waterproof design protect the lamp better.
* Heat sink independent design makes ventilation.
* Not only for stadium lighting, but also can use as high-pole
lamp.
* Lighter weight, smaller volume save freight cost. More safty
during using.
* Lumileds 3030 LED has better heat dissipation, provide 150LM/W.
* High quality MEANWELL driver, input voltage AC85-305V, driver with 5 years warranty.
* 20°, 40°, 60°, 90°, 120°, 140x100° beam angle for option.
Features:
High Efficiency Fin Heat Sink
Design of scale-to-flow heat sink to enhance heat dissipation
performance, Ensure the safety and stability of lamp beads.
Thickened Aluminum Lamp body
Thick Aluminum Lamp Body, Strong and Durable, Anti-Corrosion, Cold,
High Temperature Resistance, Uniform Light.
Hi Light permeability PC Lens
PC Light Mask , High light permeability , Soft light without glare.
| Power | Lumens | CCT | CRI | Input | Beam angle |
| 120W | 18000lm | 3000K~6000K | 70 | 100~240VAC | 20°,40°,60°,90°,120°,140x100° |
| 240W | 36000lm | 3000K~6000K | 70 | 100~240VAC | 20°,40°,60°,90°,120°,140x100° |
| 360W | 54000lm | 3000K~6000K | 70 | 100~240VAC | 20°,40°,60°,90°,120°,140x100° |
| 480W | 72000lm | 3000K~6000K | 70 | 100~240VAC | 20°,40°,60°,90°,120°,140x100° |
| 600W | 90000lm | 3000K~6000K | 70 | 100~240VAC | 20°,40°,60°,90°,120°,140x100° |
| 720W | 108000lm | 3000K~6000K | 70 | 100~240VAC | 20°,40°,60°,90°,120°,140x100° |
| 960W | 144000lm | 3000K~6000K | 70 | 100~240VAC | 20°,40°,60°,90°,120°,140x100° |
| 1200W | 180000lm | 3000K~6000K | 70 | 100~240VAC | 20°,40°,60°,90°,120°,140x100° |
| 1500W | 225000lm | 3000K~6000K | 70 | 100~240VAC | 20°,40°,60°,90°,120°,140x100° |
Applications:
It can be widely used in stadium, tunnel, square, garden, lawn, playground, tennis, golf course, bus station, airport, sculpture,
architecture, street, parking lot etc.
While dimmable LED technology significantly reduces operating and maintenance expenses, the
simple retrofit onto existing poles means that initial expenses are
minimized too. And as the number of luminaires can be reduced
without compromising light quality, poles can be eliminated from
the space to reduce clutter.
Airport Bracket optics, available in the floodlight configuration, are designed to
address the specific needs of this application, minimizing spill
light and glare, and may be aimed to achieve cut off requirements.
Install instructions:
1. Non-specialist electricians please do not repair or modify this
product without authorization;
2. Please turn off the power before installation;
3. Before installation, please check whether the voltage marked on
the lamp is consistent with the input voltage to be connected;
4. In order to ensure the service life of the product, please do
not use it in a place with strong acid mist;
5. Pay attention to shock protection during installation and
transportation;
6. Before installation, ensure that the installation position can
withstand 10 times the weight of the product, and install it in a
flat place without vibration, no swing, no fire hazard;
7. If the lamp fails, please place the lamp in one place and send
it back to the company for inspection and repair.
8. If the lamp body or wire is damaged, please stop using it
immediately.
