Automatic JRT Jumbo Maxi Roll Log Saw, 300mm Dia Cutting Tissue
Paper Machine
Description:
This JRT maxi roll jumbo toilet paper log saw is an automatic
tissue paper cutting machine widely used to cut JRT, maxi roll,
industrial roll, jumbo toilet rolls etc.. It can handle big ranges
of cutting sizes. It adopts advanced PLC and servo motors to
control the cutting length and infeed to ensure the cutting
accuracy. It can greatly increase the production efficiency.
Quick details:
1 For cutting jumbo roll tissues
2 Automatic
3 Single lane cutting
4 Cut speed 60 cut/min
5 Cut diameter 150-300mm
1. Design speed: up to 75 cuts/min;
2. Running speed: 60cuts/min;
3. Paper width: Max. 2800mm, or to be specified.
4. Log diameter: Φ150mm –Φ300mm
5. Blade diameter: Φ1000mm.
6. Adjustable clamps for the log diameter.
7. Automatic blade sharpening system.
8. Automatic blade lubrication system.
9. Solid green round belts discharge conveyor.
10. Servo drive system for any cutting length desired with the
range from 90mm to 300mm.
11. Single in-feed channel;
12. Push button control on the adjustment of blade level.
13. Air disk brake.
14. Installed power: 22KW. 3phase 380v 50hz or customized.
15. MITSUBISHI or Siemens PLC control.
16. MITSUBISHI or Siemens touch screen operation panel.
17. Schneider electronics like brokers, contactors etc.
18. Omron sensors.
With sensors on the output to stop the machine if tissue rolls get
stuck or jammed on the output.
Strong safety guards for protection if blade breaks.
With a fan on the top to exhaust the paper dusts.
Control system:
PLC programmed control,
Inverter for variable frequency speed control,
Touch screen for operation
Servo driving
With sensors for safety doors to stop the machine on emergency.
With sensors for the doors. If the doors are open, the machine will
automatically stop.
Air compressor: 4-8kg/cm2pa, supplied by customer.
Installed Power: 3phase 380v 50hz or customized. Total about 13kw
Machine weight: about 3T.
Machine dimension: about 7.8x1.7x2.3m LxWxH. Floor plan refer to
below.
Technical parameters
| Main structure: | Single channel cutting |
| Applicable material | Toilet paper and kitchen towel rolls |
| Designed speed: | 75 cut/min |
| Working speed: | 60 cut/min |
| Infeed channel: | With one piece infeed conveyor 3meters |
| Cutting delivery system | Independent servo control and driving. |
| Cutting log diameter: | Φ150mm –Φ300mm |
| Circular blade diameter | Φ1000mm. |
| Cutting tolerance length: | ±1mm |
| Cutting tolerance vertical: | ±1.5mm |
Brands of components used on this tissue cutting machine.
| PLC | Siemens |
| Inverter | Siemens |
| Touch screen | Siemens |
| Servo motor | DELTA |
| Servo drive | DELTA |
| Bearing | SKF |
| Electrical parts | Schneider |
| Steel | #45 |
Finished products of this High Speed Logsaw Tissue Paper Cutting Machine For Tissue Paper
Rolls.
