Light Capacity Jib Crane 5 Ton Pillar Column Mounted 360 Degree
Swing Machine
Product presentation
Column mounted jib crane is a kind of crane that fixed on the
ground. Its operation area is circular due to its has a rotatable
cantilever. Combined with hoist unit like electric hoist, chain
hoist, chain block, it can realize transportation of cargos in its
coverage.
Buy stand column jib crane for workshop has the advantages of
simple structure, convenient operation, small occupation space and
large working range.
And was widely used in machinery manufacturing, automotive,
shipbuilding and other modern industrial production lines, assembly
lines and warehouses, docks, laboratories and other materials
handling operations.
It Is an ideal lifting equipment for improving work efficiency and
working conditions for the enterprise.
Crane install
1 . Column installation:
Lift the column vertically. Set all bolts in foundation right
through bolt holes on bottom flange of the column. Then adjust
column verticality and tighten all nuts.
2. Arm/jib/cantileverinstallation:
Before installation, lifting hoist should be installed on the
arm/jib/cantilever and fixed.
Aligning shaft of column to turntable hole at end of jib/arm, then
assemble arm and column together slowly.
After parts are in place, tighten the fixing bolts. Then install
the power supply ring.
Test beam rotation with a rope and rotating should be flexible
without jamming and abnormal phenomenon.
3.Drive unitinstallation:
Make cycloid reducer match with ring gear on column. Make sure that
drive gear meshes with large ring gear, then fixed the reducer to
flange by bolts.
Safty device in Jib Crane:
1) Overload Limit Switch
2). Rubber Buffers
3).Electric Protective Devices
4).Emergency Stop System
5).Voltage Lower Protection Function
6). Current Overload Protection System
7). Rail Anchoring
8).Lifting Height Limit Device
Technical parameters
| Model | BZ0.5 | BZ1 | BZ2 | BZ3 | BZ5 |
| Lifting capacity | T | 0.5 | 1 | 2 | 3 | 5 |
| Max. Lifting height | M | 3 | 3 | 3 | 4 | 4 |
| Max. Horizontal throw | M | 2.6 | 3-4 | 2.9-3.9 | 3.8 | 3.7 |
| Max. Radius of gyration | M | 3.6 | 4-5 | 4-5 | 5 | 5 |
| Max. Rotation moment | T/M | 3 | 6 | 12 | 18 | 27 |
| Angle of revolution | Degree | 360 |
| Lifting speed | Normal | m/min | 8(4) |
| Slow | m/min | 0.8(0.4) |
| Traveling speed | m/min | 20 |
| Angle of revolution speed | m/min | 1 | 0.75 | 0.7 | 0.9 | 0.6 |
Application
According to your needs, we carry out professional customization,
enquiries to provide technical parameters:
1. The capacity: _____ton.
2. The lifting height: ____m.
3. The arm length: ___m.
4. The power supply: ____P____V____Hz.
5. The working condition?
6. The crane, informs the for?
Packaging
