API Standard 360m³/H Oil Drilling Desander Separator For Mud Circulating System

Desander is a combination of shaker, desander cone. We call it desander, or desander separato

Desander separator is the sencond phase equipment in solids control system.There are many different configurations. Such as cones quantity, bottom shaker, electrical system, and so on

For oil drilling mud process, desander cone is sized 8-12''. Different size cones hold different treating capacity. Before we confirm the configuration or design on mud desander, we should consider the flow rate of all cones. For example, 10" cone capacity is about 90-120m³/h and we request 240m³/h flow rate then we need 2 desander cones at least.

Cones on APCS Desanders are all high quality polyurethane. Such cones are durable and anti-corrosive, oil-resistant, high temperature-resistant. They are very suitable for drilling fluids process. For some clients, they prefer flexible capacity adjustment during operation so we'll install ball valves on the cones inlet line. And we can configure 3 desander cone sized 10'', or 2 desander cons sized 12''. For much larger capacity, we can use 3 desander cone sized 12''. Moreover, some clients prefer the casting iron desander cone. According to the actual demand and condition, we'll make desander to satisfy both clients and working condition.

Drilling mud is transferred to cones by centrifugal pump from the shaker tank. Desander cone is fed by desander pump with fluids below shaker Under pump pressure the fluids run into cones and flow with centrifugal force. Then the heavy particlas will deposit down and pushed out of cone drop in Apex. Particles larger than 47 microns will be separated out of drilling mud.

After APCS desander processing, the cuttings finer than 47 microns will flow with fluids through outlet line on desander. The drilling mud with solids spray out of cones drop down to bottom shaker. Under vibration and filtration, the solids will be more dry and save much fluids for well drilling.The cleaned mud is to be transferred to desilter cone. However, some desander are designed without bottom shaker, the drilling mud with solids will flow out of desander on slide channel directly.

For desander separator, the bottom shaker is a flexible configuration, too. It can be Hunter-D series, or Hunter-M, or Hunter-Mini. And the screen panels can be 2, 3, or 4, even 5. For some clients' preference on dual motion, it can be made as dual motion desander, too.

Actually, the bottom shaker under desander cone is used to dry fluids out of cone. So, the mesh size is rather high and the capacity is enough for discharge from cone but not same as previous shaker

Below technical specification for your reference.

For any interes or question, please feel free to contact AIPU. You will get professional proposal in time.

AIPU Solids control is professional manufacturer on solids control equipment and system. The solution for drilling mud process as well as the drilling waste management, and the oli sludge treatment system.

All items can be used in oil and gas drilling, the oil sludge treatment, the HDD mud recycling, the civil construction micro tunnelling, the piling and so on. The main equipment inlcuding solids control system, shale shaker, mud cleaner, centrifgue decanter, degassers, agitator, mud gun, centrifugal pumps, mud tank, cuttings dryer, the mud cooling system and so on.

Pleased to say AIPU products have been delivered to many regions and conturies around the world. Including Germany, Russia, USA, UK, Kuwait,  UAE, India, Indonesia, Malaysia, Singapore, Taiwan, and so on.

Our hot sales product Hunter series shale shaker is rather popular with all of our clients. The Hunter-MG and Hunter-D shale shakers can be configured as linear motion, BEM or the dual motion. For the decks, they can be double deck. For the base, they can be dual tandem or triple tandem

Another hot sales products Hunter seires mud cleaner is maintained all the good features of Hunter series shaker. And the hydrocylones are all made of high quality polyurethane. Another feature is the cones are interchangeable with famous brand ones.

Besides the shale shaker and mud cleaner, there are centrifugal pumps, mud agitators and so on equipment appreciated by our clients. New innovated mud cooling system for land oil drilling is a patented products used in SINOPEC drilling site. The performance surprised end users.

Why clients select AIPU?

It's because of high qualty and the reasonable cost happened during our cooperation. We are professional on solids control, mud process, sludge treatment. Among all the orders there are over 80% orders are repeat orders from our regular clients or recommned by them

Are you in the demand of solids control or other mud treatment-related items now? Please come to us freely. Trust you will be surprised by AIPU products and servcies. All the solutions will be optimal and soonest one.