6063 6061 CNC Engraving and milling Aluminum spare part and panel
1.Advantages of CNC Engraving and milling Machine:
1) Engraving, milling, engraving machine on the basis of the
increased spindle, servo motor power, bed bearing, while
maintaining the high speed of the spindle, more importantly, high
precision.Engraving and milling machine also to high-speed
development, generally known as high-speed machine, cutting ability
is stronger, machining precision is very high, can also directly
machining hardness in HRC60 above the material, a molding.
2) Can use standard CAD/CAM software such as MasterCam Cimatron PE
UG etc.
3) The standard size 1500x3000mm, which can be large or small.Small
1200 x600mm
4) The table is vacuum adsorption, can save a lot of time and
energy about fixture tedious dismantling.
5) Without a cover for table, it is easier to cut materials, and
the machining accuracy is not lower than that of traditional CNC,
but the cost is more advantage than traditional CNC.
6) High spindle speed, high repeat positioning accuracy, screw and
linear slide rail optionally.
7) Suit for soft metal. Cannot process steel and stainless steel
2.Advantages of CNC Engraving and milling Aluminum product:
1) The cutting and milling surface is smooth and burr - free,
saving the later polishing treatment
2) High milling precision of external dimension. For example: 1220
x2440x1. 5 mm, 1043 x2235x1. 5 mm (+ 0.05 mm)
3) Suitable for metal (Aluminum,Mg,Cu):1-100mmX1/2 B5
Engineering plastics: 1-100mm X1/4 B5
4) Laser cutting cannot avoid burrs, and the shearing machine will
be deformed
5) No need huge mould fees which can save your cost, suitable for
small quantity order or aluminum sheet or spare parts
6) Suit small size aluminum alloy spare part,ABS plastic etc
process.
3.Chemical Composition:
| Purity | AL | AL99.60 | AL99.50 | AL99.00 | AL95.00 |
| Aluminum | AL | 99.6 | 99.5 | 99 | 95 |
| Foreign Content,Maximum | Fe | 0.25 | 0.3 | 0.5 | 3 |
| Si | 0.18 | 0.25 | 0.45 | 2 |
| Cu | 0.01 | 0.15 | 0.22 | 0.5 |
| Ca | 0.03 | 0.05 | 0.05 | 0.1 |
| Mg | 0.03 | 0.05 | 0.05 | 0.1 |
| Zn | 0.01 | 0.05 | 0.05 | 0.1 |
| Others | 0.02 | 0.02 | 0.05 | 0.05 |
| Total | 0.4 | 0.5 | 1 | 5 |
| Alloy Code | temper | Tensile Strength
Rm(MPa) | Yield Strength Rp0.2(Mpa) | Extend Ratio
A50(%) |
| TR-010,TR-020,TR-030,TR-040,TR-050,TR-110,TR-310,TR-116,TR-316,TR-111,TR-313,TR-121,TR-131,TR-141,TR-150,TR-151,TR-156
Etc. | O | 95-135* | ≥35* | ≥15* |
| H14 | 140-185 | ≥125 | ≥1.5 |
| H24 | 140-185 | ≥125 | ≥3.0 |
| H16 | 185-225 | ≥160 | ≥1.0 |
| H18 | ≥185 | - | ≥0.5 |
| TR-166 Etc.tube material | H24 | 185-235 | ≥150 | ≥8 |
TR-116,TR-316 Etc.tube
material | H14 | 140-185 | ≥125 | ≥3 |
| H24 | 140-185 | ≥125 | ≥8 |
3.Company Introduction:
Trumony Aluminum Co.LTD build from 2006, have export over 53
countries of worldwide. We are widely engaged in transportation, heat exchanger, cable,
packaging, construction, electronics, environmental protection and
other fields. Apart from our current production,we are also
actively developing new aluminum materials and searching for
customers solutions which is best suited for different industries
to meet the precise needs of customers. Our main products are aluminum coil, aluminum foil, aluminum
strip, aluminum roll, aluminum radiator tube for vehicle, aluminum
pipe, aluminum tube, flat aluminum micro channel tube etc, for
automobile heat exchangers area such as radiator, intercooler,
condenser, evaporator and industrial heat exchangers, air
conditioner etc.
We already supply products to many auto vehicles factories. We also
provide radiator solution plans.
FAQ
1, Q: Are you manufacturer of CNC Engraving and milling Aluminum
sheet and spare part?
A: Yes, we are established in 2006. As a manufacturer,we welcome
our customers to visit our factory.
2, Q: Do you accept customized orders?
A: Yes, we do. Your customized orders are always welcomed. Please
kindly offer us your technical perfrmances or samples so that we
can customize the products according to your preferences. About any
further detail, please feel free to contact us.
3. Q: How can I get one quotation faster?
A: Pls offer details about your demands as more as possible,like
drawing with detailed thickness and specification, aluminum alloy
code, working temperature,color,quantity,application,etc.
4. Q: If I can not offer above information,what should I do?
A: Try your best to offer more information,or can send sample to
us.
5. Q: What is your company sample policy?
A: As one supplier,we see that sample is necessary for our both
sides,our policy is to offer sample as possible as we can,just one
situation is exception,sample is with very complex
structure,besides,we have no it in stock.
About sample shippment,you need to pay for the freight,usually
freight collect by express.
6. Q: What is the lead time of sample?
A: There are several different situations:
5~10days if no stocked sample and the sample structure is not
complex;
11~15days if no stocked sample and the sample is with complex
structure.
