Introduction of SA5000 Hydraulic Spike Road Block Barrier:


Their components are mainly composed of three parts: the main frame of the roadblock machine, the hydraulic drive system and the electrical control system:

 

Main frame: The roadblock machine is mainly composed of a flip body or a lifting body and a machine base (anti-collision tooth nails can be added according to customer needs). The whole machine is made of steel structure and welded by national standard 16mm thick A3 carbon steel plate and channel steel. It has high load bearing and anti-collision ability; there are no electrical appliances and circuit settings in the machine body, waterproof and safe. The device is buried in the driveway or the designated position of the gate, and the traffic of the vehicle is restricted by the instructions of the duty personnel.

 

Hydraulic transmission station: The hydraulic transmission station is mainly composed of an oil tank, a manual oil pump, a full set of hydraulic solenoid valve sets, a high-power motor, an oil pump, an oil cylinder, an oil gauge, a high-pressure hydraulic oil pipe, etc. It is the power source of the entire roadblock system. The device is installed on the roadblock On the side of the machine, it is used in conjunction with the roadblock machine (you can change the ascent and descent speed through the adjustment valve), you can manually lower the baffle when the power fails, or you can manually raise it.


Electronic control system: automatic electronic control part: adopts single-chip PLC/MCU control, leakage current switch, contactless noise high-life contactor and other precise start time settings (impact force generated after the anti-oil cylinder stroke is in place increases the service life of the cylinder).

 

The roadblock machine is mainly composed of a flip body, a lifting body, and a base, with anti-collision tooth nails 30*60mm, mandatory interception; there are channel steel GB 16, 12 etc. around the center and the load bearing, strong anti-collision ability; the connection is low 3~ 8 50MM rotating shaft activities, simple and flexible operation, hydraulic transmission, smooth, fast movement, low noise, strong traffic capacity, no electrical appliances and circuits in the body, waterproof, safe and reliable.

 

SA5000 Security Road Blocks Technic Specifications: 

 

Body specifications length 3000mm * width 1000mm * height 780mm
Interception width 2700mm
Lifting height 500mm
Panel thickness 16mm
Panel material A3 steel
Hair tip specifications stainless steel material, 30mm * 60mm (diameter * length)
Treatment process anti-rust paint treatment
Overall weight about 1.2 tons
Lifting force 2 tons
Waterproof rating  IP68
Passing pressure 120 tons container truck can pass
Ascent speed 3 ~ 5S

 

 

SA5000 Hydraulic roadblock machine is a device that controls the passage of road vehicles. The types of roadblock machines can be divided into: overturning roadblock machine (split hair tip/no hair tip), roadblock wall (split hair tip/no hair tip), simple road block machine. The hydraulic drive part can be equipped with vehicle detectors, ground sense coils, infrared sensors, can be used in conjunction with barrier control systems, etc., or can be used alone. It can be used in conjunction with the barrier control system, etc., or it can be used alone; it is specially designed and developed to prevent non-permitted vehicles from forcing in. It has high practicality, reliability and safety; it is suitable for customs, border inspection, treasury, Vehicle access control in special places such as nuclear power plants, airports, logistics, ports and terminals.

 

" }
Sign In | Join Free | My burrillandco.com
Home > Cutting and Forming Tools >

IP68 Water-proof Hydraulic Automatic road block barrierTraffic Barricades For Restricted Area

    Buy cheap IP68 Water-proof Hydraulic Automatic road block barrierTraffic Barricades For Restricted Area from wholesalers
     
    Buy cheap IP68 Water-proof Hydraulic Automatic road block barrierTraffic Barricades For Restricted Area from wholesalers
    • Buy cheap IP68 Water-proof Hydraulic Automatic road block barrierTraffic Barricades For Restricted Area from wholesalers
    • Buy cheap IP68 Water-proof Hydraulic Automatic road block barrierTraffic Barricades For Restricted Area from wholesalers

    IP68 Water-proof Hydraulic Automatic road block barrierTraffic Barricades For Restricted Area

    Ask Lasest Price
    Brand Name : Securina
    Model Number : SA5000
    Certification : FCC, CE
    Price : USD500-50000/set
    Payment Terms : Western Union, MoneyGram, T/T
    Supply Ability : 1000units/month
    Delivery Time : 5-10 working days after payment confirmation
    • Product Details
    • Company Profile

    IP68 Water-proof Hydraulic Automatic road block barrierTraffic Barricades For Restricted Area

    IP68 Water-Proof Hydraulic Automatic Road Block BarrierTraffic Barricades For Restricted Area


    Introduction of SA5000 Hydraulic Spike Road Block Barrier:


    Their components are mainly composed of three parts: the main frame of the roadblock machine, the hydraulic drive system and the electrical control system:


    Main frame: The roadblock machine is mainly composed of a flip body or a lifting body and a machine base (anti-collision tooth nails can be added according to customer needs). The whole machine is made of steel structure and welded by national standard 16mm thick A3 carbon steel plate and channel steel. It has high load bearing and anti-collision ability; there are no electrical appliances and circuit settings in the machine body, waterproof and safe. The device is buried in the driveway or the designated position of the gate, and the traffic of the vehicle is restricted by the instructions of the duty personnel.


    Hydraulic transmission station: The hydraulic transmission station is mainly composed of an oil tank, a manual oil pump, a full set of hydraulic solenoid valve sets, a high-power motor, an oil pump, an oil cylinder, an oil gauge, a high-pressure hydraulic oil pipe, etc. It is the power source of the entire roadblock system. The device is installed on the roadblock On the side of the machine, it is used in conjunction with the roadblock machine (you can change the ascent and descent speed through the adjustment valve), you can manually lower the baffle when the power fails, or you can manually raise it.


    Electronic control system: automatic electronic control part: adopts single-chip PLC/MCU control, leakage current switch, contactless noise high-life contactor and other precise start time settings (impact force generated after the anti-oil cylinder stroke is in place increases the service life of the cylinder).


    The roadblock machine is mainly composed of a flip body, a lifting body, and a base, with anti-collision tooth nails 30*60mm, mandatory interception; there are channel steel GB 16, 12 etc. around the center and the load bearing, strong anti-collision ability; the connection is low 3~ 8 50MM rotating shaft activities, simple and flexible operation, hydraulic transmission, smooth, fast movement, low noise, strong traffic capacity, no electrical appliances and circuits in the body, waterproof, safe and reliable.


    SA5000 Security Road Blocks Technic Specifications:


    Body specificationslength 3000mm * width 1000mm * height 780mm
    Interception width2700mm
    Lifting height500mm
    Panel thickness16mm
    Panel materialA3 steel
    Hair tip specificationsstainless steel material, 30mm * 60mm (diameter * length)
    Treatment processanti-rust paint treatment
    Overall weightabout 1.2 tons
    Lifting force2 tons
    Waterproof ratingIP68
    Passing pressure120 tons container truck can pass
    Ascent speed3 ~ 5S


    SA5000 Hydraulic roadblock machine is a device that controls the passage of road vehicles. The types of roadblock machines can be divided into: overturning roadblock machine (split hair tip/no hair tip), roadblock wall (split hair tip/no hair tip), simple road block machine. The hydraulic drive part can be equipped with vehicle detectors, ground sense coils, infrared sensors, can be used in conjunction with barrier control systems, etc., or can be used alone. It can be used in conjunction with the barrier control system, etc., or it can be used alone; it is specially designed and developed to prevent non-permitted vehicles from forcing in. It has high practicality, reliability and safety; it is suitable for customs, border inspection, treasury, Vehicle access control in special places such as nuclear power plants, airports, logistics, ports and terminals.


    Quality IP68 Water-proof Hydraulic Automatic road block barrierTraffic Barricades For Restricted Area for sale
    • Haven't found right suppliers
    • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
    • And this service is free of charge.
    • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
    Submit Buying Request
    Send your message to this supplier
    *From:
    Your email address is incorrect!
    *Subject:
    Your subject must be between 10-255 characters!
    *Message:
    For the best results, we recommend including the following details:
    • --Self introduction
    • --Required specifications
    • --Inquire about price/MOQ
    Your message must be between 20-3,000
    Yes! I would like your verified suppliers matching service!
    Send your message to this supplier
     
    *From:
    *To: Securina Detection System Co., Limited
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Explore more Hydraulic Road Blocker products from this supplier
    Find Similar Products By Category:
    Inquiry Cart 0