Out Mounted 12" Pneumatic Pipe Cutting And Beveling Machine
Pneumatic Pipe Cutting And Beveling Machine Introduction
The machine adopt long-outside annular structure design, which can
be applicable for the narrow space, it is easy to install and
disassemble. The drive mechanism with special design can make
high-strength cut and service life longer. It can meet the
different requirements by assembling with pneumatic or electric
motor. The particular design can eliminate the wear of bearing and
keep work stably and high precision during its long-term operation.
Pneumatic Pipe Cutting And Beveling Machine Features
■ Cold Cutting and Beveling, no heat affected zones
■ Aeronautical aluminum material ensure portability
■ Low axial and radial clearance
■ Full closed bearing and driving gear system for operation safety
■ Machining OD of pipe from 2” up to 84”
Pneumatic Pipe Cutting And Beveling Machine Specification
■ Drive Options: Pneumatic, Hydraulic, and Electric
■ Air requirements: 2-3m³/min
■ Hydraulic requirements: 65L/min,10MPa (15.8GPM,1500PSI)
■ Electric requirements: 220V/AC 50/60Hz
Beveling type
Models
| Model | Processing range (in) | Max wall thickness (mm) | Weight(kg) | Drive mode |
| SFM0206 | 2"~ 6" | 30 | 35 | Pneumatic Hydraulic Electric |
| SFM0408 | 4"~ 8" | 40 | 40 |
| SFM0612 | 6"~12" | 80 | 45 |
| SFM0814 | 8"~14" | 100 | 55 |
| SFM1218 | 12"~18" | 100 | 70 |
* Processing range can be customized according to the pipe
diameter.
