Tube mill with slide shoes and INTEGRAL DRIVE
Compact and efficient!
ZTIC Tube Mills are space-saving, compact, high on performance and
low on maintenance. This is primarily due to the support bearing
design and the mill drive used. The mill is shell-supported,
mounted on slide shoe bearings at both ends and made completely as
a welded design. The mill with the compact drive version features
an INTEGRAL DRIVE, whose planetary gear is mounted to the mill
flange.ZTIC Tube mills are the result of the most advanced
calculation and simulation methods, backed by years of experience.
Worldwide we have designed and built more than 1,000 tube mills.
High on performance, low on space requirements: INTEGRAL DRIVE
Our mills for minimum space requirements are mounted on slide shoe
bearings and have an INTEGRAL DRIVE. The core of this drive is a
two stage planetary gear reducer, which is directly mounted on the
end cone. Only one short slide seal at the motor end and a closed
oil lubrication system extend the time between oil changes and
reduce the risk of entering of dust particles. Installation is fast
and easy. No time consuming adjustments. Our INTEGRAL DRIVE is the
most economic drive due to its high availability and a mechanical
efficiency level of almost 99%.
Girth gear and pinion drives are sufficient for up to 4,500kW. Our
INTEGRAL DRIVE is suitable for up to 6,500kW. For mills with a
drive power of between 5,000 and 10,000kW, we recommend a classic
central drive with fixed planetary gears.
Technical Parameters of Cement Tube Mill:
| Specification (diameter×length) | Rotating speed
(r/min) | Feeding size (mm) | Productivity (t/h) | Loading capacity of mill (t) | Main motor | Main speed reducer | Weight (t) |
| Model | Power (kw) | Rotating speed (r.p.m) | Model | Speed ratio |
| φ2.2×11 | 20.91 | ≤25 | 15~17 | 50 | TR1512-8 | 570 | 740 | Zd80 | 5.6 | 92 |
| φ2.4×8 | 20.91 | ≤25 | 14~18 | 39.5~42 | TRQ1512-8 | 570 | 740 | Zd80-9 | 5 | 76.4 |
| φ2.4×9 | 20.91 | ≤25 | 23~25 | 50 | TR1512-8 | 570 | 740 | Zd80-9 | 5 | 91 |
| φ2.4×10 | 20.91 | ≤25 | 16~22 | 50 | TR1512-8 | 570 | 740 | Zd80-9 | 5 | 111 |
| φ2.4×11 | 21 | ≤25 | 19~24
22~28 | 6265 | YR710-8/1180 | 710 | 740 | JDX630 | 5.6 | 125 |
| φ2.4×12 | 21 | ≤25 | 18~20
21~23 | 6365 | YR800-8/1180 | 800 | 740 | MBY710 | 6.3 | 127 |
| φ2.4×13 | 21 | ≤25 | 21~22
24~26 | 6668 | YR800-8/1180 | 800 | 740 | MBY710 | 6.3 | 131 |
| φ2.6×10 | 20.6 | ≤25 | 21~24 | 64 | YR800-8/1180 | 800 | 740 | JDX710 | 6.3 | 140 |
| φ2.6×13 | 20.6 | ≤25 | 28~31 | 81 | YR1000-8/1180 | 1000 | 740 | JDX800 | 6.3 | 158 |
| φ3.0×9 | 19.13 | ≤25 | 40~45 | 85 | YR1000-8/1180 | 1000 | 740 | MBY800 | 7.1 | 148 |
| φ3×11 | 18.92 | ≤25 | 44~47 | 95 | YR1250-8/1430 | 1250 | 740 | JDX900 | 7.1 | 177 |
| φ3×12 | 18.92 | ≤25 | 48~52 | 103 | YR1250-8/1430 | 1250 | 740 | JDX900 | 7.1 | 182 |
| φ3×13 | 18.92 | ≤25 | 39~45 | 116max | YR1400-8/1430 | 1400 | 740 | JDX900 | 7.1 | 200.7 |
| φ3.2×11 | 18.3 | ≤25 | 45~48 | 112max | YR1600-8/1430 | 1400 | 740 | JDX900 | 7.15 | 213.6 |
| φ3.2×13 | 18.7 | ≤25 | 50~55 | 133max | YR1600-8/1430 | 1600 | 740 | JDX1000 | 7.15 | 237 |
| φ3.4×11 | 18 | ≤25 | 45~55 | 120max | YR1600-8/1430 | 1600 | 740 | JDX1000 | | 230 |
| φ3.5×13 | 17 | ≤25 | 60~65 | 156max | YR2000-8/1730 | 2000 | 740 | TS130-A-F1 | | 257.6 |
φ3.8×13
(main bearing type) | 17 | ≤25 | 65~70 | 190 | YR2500-8/1730 | 2500 | 740 | JS130-C-F1 | | 316 |
| φ3.8×13 | 17 | ≤25 | 65~70 | 185 | YR2500-8/1730 | 2500 | 740 | DMG22/2500 | | 313 |
| φ4×13 | 16.3 | ≤25 | 78~80 | 191 | YRKK900-80 | 2800 | 745 | JS140-A | | 348 |
φ4.2×11
(main bearing type) | 15.8 | ≤25 | 100~110 | 182~190 | YR2800-8/17830 | 2800 | 740 | JS140-A-F1D | | 350 |
φ4.2×13
(main bearing type) | 15.2 | ≤25 | 120~130 | 245 | YRKK1000-8 | 3350 | 740 | MFY355-A | | 390 |
| φ4.2×13 | 15.2 | ≤25 | 110~120 | 230 | YRKK1000-8 | 3350 | 740 | MFY355-A | | 380 |
| φ4.6×14 | 15 | ≤25 | 100~115 | 285 | YR1000-8 | 4200 | 740 | J3160-C | | 485 |
Note: Parameters in the form are only for reference, so for
specific ones, customers need to refer to the contract.
Technical Parameters of Raw Mill:
| Specification (diameter×length ) | Rotating speed
(r/min) | Feeding size (mm) | Productivity (t/h) | Loading capacity of mill (t) | Main motor | Main speed reducer | Weight (t) |
| Model | Power (kw) | Rotating speed (r.p.m) | Model | Speed ratio |
| φ3×(8.5+5) | 18.9 | ≤25 | 55~53 | 76~80 | YR1000-8/1180 | 1000 | 740 | JDX800 | 6.3 | 160 |
φ3.2×(7+1.8)
(Cantilever drying) | 18.25 | ≤25 | 50~53 | 59 | YR630-8 | 1000 | 740 | JDX800 | 6.3 | 153 |
φ3.5×10
(Cantilever drying) | 17.3 | ≤25 | 75~80 | 87 | YR1250-8/430 | 1250 | 740 | JS110-A-F1 | | 214 |
| φ3.6×(7.5+1.5) | 17.3 | ≤25 | 90~95 | 98 | YRkk710-8 | 1400 | 740 | JDX900 | 7.1 | 220 |
| φ3.8×1.2 | 16.6 | ≤25 | 133 | 100~110 | YR800-8 | 2000 | 740 | JS130-A | | 295 |
| φ4.6×(9.5+3.5) | 15 | ≤25 | 185 | 175~180 | YRkk1000-8 | 3550 | 740 | MFY355A | | 415 |
Note: Parameters in the form are only for reference, so for
specific ones, customers need to refer to the contract.
Technical Parameters of Wet Raw Mill:
| Specification (diameter×length ) | Rotating speed
(r/min) | Feeding size (mm) | Productivity (t/h) | Loading capacity of mill
(t) | Main motor | Main speed reducer | Weight (t) |
| Model | Power (kw) | Rotating speed (r.p.m) | Model | Speed ratio |
| φ2.2×7 | 21.4 | ≤3 | 20~25 | 31 | YR148-8 | 380 | 740 | ZD70-9 | 5 | 49 |
| φ2.2×13 | 21.6 | ≤25 | 33~37 | 58~60 | YR630-8/1180 | 630 | 740 | MBY630 | 5.6 | 53.4 |
| φ2.4×13 | 21 | ≤25 | 45~50 | 65~70 | YR800-8/1180 | 800 | 740 | JDX710 | 5.6 | 131 |
| φ2.6×13 | 20 | ≤25 | 45~46 | 80t (max) | YR1000-8/1180 | 1000 | 740 | TDX800 | 6.3 | 153 |
| φ6.2×6.4 | 18.5 | ≤25 | 32~41 | 86~90.5 | TDMK1000-36 | 1000 | 740 | | | 134 |
Note: Parameters in the form are only for reference, so for
specific ones, customers need to refer to the contract.
Technical Parameters of Drying Raw Mill:
| Specification (diameter×length ) | Rotating speed
(r/min) | Feeding size (mm) | Productivity (t/h) | Loading capacity of mill
(t) | Main motor | Main speed reducer | Weight (t) |
| Model | Power (kw) | Rotating speed (r.p.m) | Model | Speed ratio |
| φ2.4×8 | 20.91 | ≤25 | 25~28 | 39~42 | JRQ1512-8 | 570 | 740 | ZD80-9 | 5 | 76.4 |
| φ2.4×10 | 20 | ≤25 | 27~30
38~40 | 50 | YR710-8/1180 | 710 | 740 | JDX630 | 5.6 | 111 |
| φ2.4×11 | 21 | ≤25 | 41~42
46~48 | 62~65 | YR800-8/1180 | 800 | 740 | MBY710 | 6.3 | 125 |
| φ2.4×12 | 21 | ≤25 | 40~42
45~48 | 63~65 | YR800-8/1180 | 800 | 740 | MBY710 | 6.3 | 127 |
| φ2.4×13 | 21.5 | ≤25 | 48~51 | 68~72 | YR800-8/1180 | 800 | 740 | MBY710 | 6.3 | 131 |
| φ2.6×8 | 20 | ≤25 | 30~35 | 54 | YR630-8/1180 | 630 | 740 | JDX630 | 5.6 | 135 |
| φ2.6×10 | 20.91 | ≤25 | 45~46 | 80 | YR1000-8/1180 | 1000 | 740 | JDX710 | 6.3 | 136 |
| φ3×9 | 19.13 | ≤25 | 50~55 | 76~80 | YR1000-8/1180 | 1000 | 740 | JDX800 | 6.3 | 145 |
| φ3.2×7 | 18.25 | ≤25 | 50~52 | 58 | YR1000-8/1180 | 1000 | 740 | MBY800 | 6.3 | 140 |
| φ3.2×9 | 18.3 | ≤25 | 60~70 | 90 | YR1250-8/1430 | 1250 | 740 | JDX900 | 7.1 | 175 |
| φ4.6×10+3.5 | 15 | ≤25 | 195 | 190 | | 3550 | 740 | JS150-B-F | | 476 |
Note: Parameters in the form are only for reference, so for
specific ones, customers need to refer to the contract.
