Product Description
Manufacturer customized flap dryer
Turn-over dryer uses hot air as drying medium and continuously
contacts with wet material to remove water vaporization and
evaporation in wet material, so as to achieve drying purpose. The
machine occupies less area and has large paralysis area. Turn-over
dryer is widely used for sheets with fast water loss rate, poor
fluidity, poor permeability and high drying temperature. The effect
of granular, granular and sectional strip materials is better,
especially in the fields of granular chemical products, Chinese
herbal slices, tea, coconut, organic pigments and so on.
Productivity: 8-36 t/h
Scope of application: Drying materials of certain humidity or granularity in mineral
processing, building materials, metallurgy, chemical industry and
other departments
Working Principle
(1) The head active sprocket tracts the chain, which drives the
turning plate, and the turning plate carries the material
circulating and moving.
(2) Material first falls into the upper flip plate through the tail
top inlet port, and moves from the tail to the nose. During the
moving process, it contacts with hot air to remove moisture. When
it moves close to the sprocket of the nose, the flip plate turns
down and the material is discharged into the lower flip plate. When
the material is unloaded, the turning plate rotates around the
sprocket to the lower layer, receives the material from the upper
layer and returns to the tail of the machine. After the material is
unloaded into the lower winding, the passive sprocket at the tail
of the machine returns to the upper layer and continues to
circulate. The material discharged into the lower group continues
to circulate, move and dry, and finally discharges into the tail
hopper.
(3) The heat source of the heat source drying system can be either
coal-based or waste heat from factories and mines or blast furnace
gas. It is only necessary to change the technology and data of the
hot blast stove and increase the spray head and accessories. Our
factory designs utilization methods according to user conditions.
(4) The air in the hot air system is heated by the heating furnace.
After temperature adjustment, the air is fed into the bottom air
duct of the furnace seat by the fan and then into the distributor
and branch air duct by the regulating valve. The distributor holes
on the branch air duct are blown into the kiln. After full contact
with the materials, the wet steam carries water and discharges from
the top exhaust air outlet of the kiln body.
Product Advantage
Compact structure, saving space
Compared with the belt dryer, the equipment has a heavy structure,
and its structure is more compact. It can save 50% of the area than
the belt dryer.
Light rail combination, duplicate freely.
The guide rail adopts the light rail combination structure, and the
sprocket adopts the automatic expansion device. The duplication
structure is our company's unique structure, which can ensure that
the duplication is free. It also effectively solves the problems of
chain dropping, chain jamming and chain running.
Digital temperature measurement shows high safety factor
Fire-proof device, kiln head, kiln, kiln tail are equipped with
temperature measuring device and digital display, smoke gate is
installed at the inlet of flue, once the machine breaks down, heat
source is cut off immediately to prevent fire.
Hot air distributes evenly and reduces the crushing rate of spheres
According to the characteristics of material outlet moisture and
material, the hot air is evenly distributed by upper air or
interlayer air distribution, which can effectively prevent the ball
from cracking and bursting due to rapid heating, thus improving the
quality of the ball and reducing the rate of breakage.
