Long lifetime Traditional Corrugating Roll Tungsten Carbide Rolls
1. Introduction
Tungsten carbide corrugating roll is the most important part of
single facer and it’s a essential part for corrugated cardboard or
carton manufacturers. We apply JP8000 HVOF technology which is
imported from American Praxair. High hardness, strong binding
force, good abradability and excellent performance of polishing can
prolong the service lifetime.
2. Durable from Supersonic Tungsten Carbide Spraying
Tungsten carbide corrugated roller producing technology is
different traditional corrugated roll. Because of the particularity
of tungsten carbide material, the requirement of the base material
hardness is higher, flute profile before tungsten carbide spraying
is more precise, which is needed to match the performance of
tungsten carbide. Spraying technology is the key, which can ensure
the hardness and binding force of tungsten carbide.Most advanced
Praxair JP 8000 HVOF tungsten carbide spraying equipment and
technology is adopted and Praxair 1342 super hard tungsten carbide
powder is used for our corrugating roll. Before tungsten carbide
spraying, we do sand blasting treatment on the surface which make
rough surface to increase adhesion of tungsten carbide powder.
American Praxair Tungsten Carbide Plating equipment.
Sand blasting machine
3.Repeatedly Polished, Smooth As a Mirror
Meijia adopts special polishing crafts, such as the corrugated
rollers use America Praxair 1342VM series super hard tungsten
carbide roller, special customized polishing wheel. With our
company’s fully automatic CNC corrugated roller producing process’s
special polishing machine and our independent grinding polishing
technology R&D, the tungsten carbide roller’ s surface finish
degree can reach Ra<0.6μm, which will improve the accuracy of
the flute profile, and make sure the quality of the corrugated
roller.
Polishing machine
4. Precision index of traditional corrugating rolls
| Item | Index |
| Gear teeth height limits of deviation | ≤ 0.01mm |
| Addendum circle run out tolerance | ≤ 0.02mm |
| Gear teeth width limits of deviations | ≤ 0.015mm |
| Tooth profile limits of deviations | ≤ 0.01mm |
| Gear lateral face counter shaft parallelism | ≤ 0.01mm |
| Tip cylinder element linear | ≤ 0.01mm |
| Gear teeth division limits of deviations | ±10" |
| Smooth finish | Ra<0.6µm |
5. Flute Profile
Almost every set of corrugating rolls are needed to be designed and
customized separately according to the width, diameter, flute
height, corrugated paper GSM, speed and cardboard physical index
requirement.
| Flute | Profile | Height(mm) | Pitch(mm) | Flutes/300mm | T.U.R |
| A | UV | 4.5-5.0 | 8.0-9.5 | 34±3 | 1.45-1.52 |
| C | UV | 3.5-4.0 | 6.8-7.9 | 41±3 | 1.37-1.47 |
| B | UV | 2.5-3.0 | 5.5-6.5 | 50±4 | 1.33-1.41 |
| E | UV | 1.1-2.0 | 3.0-3.5 | 93±6 | 1.24-1.36 |
| F | UV | 0.8-1.0 | 2.2-3.2 | 115±20 | 1.19-1.25 |
| G | UV | 0.6-0.8 | 1.8-2.8 | 136±20 | 1.15-1.20 |
| N | UV | 0.4-0.6 | 1.2-2.2 | 193±55 | 1.10-1.15 |
| Others | UV | Customized | Design | Design | Design |
