Liquid waste of grains, sewage water, oil, etc.
Mechanical Seal MG1 Advantage
1. Fine workmanship
The product is exquisitely manufactured, and production is strictly
in accordance with international standards. Any non-conforming
product is prohibited from leaving the factory.
2.Energy-saving and environmental protection
When the double-end mechanical seal is running, the sealing cooling
water is recovered and reused through the water inlet and outlet
holes. When the seal is a single end face, the set can be used as a
water-free seal, thereby fully achieving the effect of
energy-saving and environmental protection.
3.No leakage
There will be no start-up leakage during use, and the seals are
tested before going out of the factory.
4. Structural characteristics
Easy to install, no need to measure the working length of the seal
during installation; easy to remove, take out seals for cleaning
and inspection without disassembling the pump equipment
Mechanical Seal MG1 Size Information
| Model | Shaft | d1 | d3 | D4 | db | L |
| MG1-20 | 20 | 20 | 37 | 38 | 33 | 21.5 |
| MG1-22 | 22 | 22 | 37 | 38 | 33 | 21.5 |
| MG1-24 | 24 | 24 | 42.5 | 44 | 38 | 22.5 |
| MG1-25 | 25 | 25 | 42.5 | 44 | 38 | 23 |
| MG1-28 | 28 | 28 | 49 | 50 | 44 | 26.5 |
| MG1-30 | 30 | 30 | 49 | 50 | 44 | 26.5 |
| MG1-32 | 32 | 32 | 53.5 | 55 | 46 | 27.5 |
| MG1-35 | 35 | 35 | 57 | 59 | 50 | 28.5 |
| MG1-38 | 38 | 38 | 59 | 61 | 53 | 30 |
| MG1-40 | 40 | 40 | 62 | 64 | 55 | 30 |
| MG1-45 | 45 | 45 | 68 | 70 | 60 | 30 |
| MG1-48 | 48 | 48 | 70.5 | 74 | 63 | 30.5 |
| MG1-50 | 50 | 50 | 74 | 77 | 65 | 30.5 |
| MG1-55 | 55 | 55 | 81 | 83 | 72 | 35 |
| MG1-60 | 60 | 60 | 88.5 | 91 | 79 | 38 |
