Vertical shaft hammer crusher spare parts compound crusher
The vertical combination crusher is a new type of fine crushing and
rough milling product after optimizing and designing the main
technical parameter and combining the crushing technologies
domestic and international. It is mainly used to crush crude cement
materials and grogs in medium sized factory, providing an ideal
fine crushing equipment for the technological innovation of cement
factories or setting up the cement production line.
Working principle
When the motor runs, it drives the central shaft, four line of
hammers are fixed on the centrical shaft, each line with four
pieces of hammers. Materials are fed from top of the crusher, they
are crushed by the high speed rotation hammers. There are liners
around the crusher body to protect the crusher from damage. By
gravity, the materials are threw to the crushing cavity and impacted by
the high rotating hammers. It goes like this several times,
materials comes out from bottom of the crusher.
Product Advantages
1.It features simple structure and easy operation. adopting the
principle of stone strike stone , smaller wear.
2.High crushing rate, less energy consumption.
3.It is good at crushing material with high moisture content,
humidity can reach 8%.
4.Suitable for breaking medium hard, especially like clay,
limestone and gypsum
Specifications
| Model | PFL-800 | PFL-1000 | PFL-1250 | PFL-1500 | PFL-1750 |
| Feed Grain(mm) | 100 | 120 | 150 | 180 | 200 |
| Material-in Size (mm) | 0-5 | 0-5 | 0-5 | 0-5 | 0-5 |
| Trening Capacity(t/h) | 10-20 | 20-40 | 40-70 | 70-100 | 130-190 |
| Motor Power (kw) | 22 | 45-55 | 75 | 90-110 | 132-160 |
| Maine Shaft Speed(r/min) | 934 | 769 | 530 | 495 | 424 |
| Overall Dimension(mm) | 2100*1200*1700 | 2600*1400*1900 | 2800*1600*2100 | 3100*1900*2200 | 3710*2360*2390 |
| Weight(t) | 2.3 | 4.5 | 6.2 | 8.3 | 12 |
Compound crusher spare parts
The major wearing parts of the compound crusher is impact plates
and hammers. The impact plates are made of high manganese alloy
Mn13Cr2, and hammers are made of extremely wearable materials
Cr26NiMo.
Pre-sales Service:
1.The wide product range enables us to provide our customers with
stand-alone machines or complete processing plants;
2.Based on our customers'request and budget, our experts make
efficient, reliable solutions;
3.Before placing the order every customer has the chance to visit
daiwo working machines or complete plant in the site;
4.We have a full set of testing equipment, to provide a good test
environment.
After-sales Service:
1.Experienced technicians guidance and engineers will be dispatched
to the quarry site to help install the customers'plants;
2.Provide necessary training about machine daily maintenance to
local workers ;
3.After-sales department has well-trained employees and
professional installation engineers.
