OLED Display 24VDC Clamp On Water Flow Meter
I INTRODUCTION
ML-F8 is very unique in its structural design. It uses a circular
magnetic steel to achieve automatic connection during
installation.It takes only 2-3 minutes to complete the whole
process from installation to measurement. It also adopts the
current popular OLED display, which makes it easy to read in low
light conditions.
ML-F8 is widely used in the production process for flow measurement
and monitoring. The application of the product continuously and
effectively controls the flow of the fluid, so as to improve the
yield of the product and even save the input of the personnel,
bringing benefits to the production enterprise.
II. SPECIFICATION
Model: ML-F8
Velocity Range: 0.1 m/s ~ 5.0 m/s
Accuracy: ± 2.0%
Repeatability: 0.80%
Pipe Size: DN15,DN20,DN25,DN32,DN40,DN50
Data Storage: Daily, Monthly, Yearly Totalizer
Analog output: 4~20mA, Maximum load: 600Ω
Alarm output: OCT, Upper and lower limit alarm function (for
option)
Communication: RS485,support Modbus communication protocol
Power Supply: 24VDC
Cable Length: 1.8m
Keypad: Four light touch buttons
Screen: OLED 128*64 screen display
Units: Metric and imperial units are available
Cubic Meters(m3), Liters(L),USA Gallons(GAL)/hour, USA
Gallons(GAL)/min
Default unit setting: m3/h
Totalizer: Six bit digit
Piper Material: Stainless steel pipe, carbon steel pipe, PVC
Case Material: Aluminum alloy
Environment Temp.:0℃-50℃
Medium Temp.:0℃-50℃
Environment Humidity: 0-95% relative humidity, without condensation
IP Grade: IP54
III. PIPE SPECIFICATION
| Size | DN15 | DN20 | DN25 | DN32 | DN40 | DN50 |
Nominal Pipe
Diameter Size | 15mm | 20mm | 25mm | 32mm | 40mm | 50mm |
| Pipe OD | 20mm | 25mm | 32mm | 40mm | 50mm | 63mm |
| Pipe ID | 15mm | 19mm | 26mm | 33mm | 43mm | 55mm |
| Inch | 1/2’’ | 3/4’’ | 1’’ | 1.2’’ | 1.5’’ | 2’’ |
IV. INSTALLATION STEPS
