C-4 Insulated Coated 50ww1300 EI Laminations

ei transformer lamination sheet ei core lamination for transformer electrical steel crno

Baosteel Challenges 0.2mm: Ultra-thin Oriented Silicon Steel Successfully Replaces Imports

The production and application of ultra-thin oriented silicon steel products of Baosteel Co., Ltd. are becoming more and more mature, breaking the long-term monopoly of imported products in the field of 0.2mm oriented silicon steel in the field of power transformers.

All the 110KV main transformers of large-scale rolling mills made of ultra-thin oriented silicon steel produced by Baosteel Co., Ltd. have been commissioned and loaded with various technical and economic indicators since the 2030 cold rolling unit test for one month, and the energy efficiency has been significantly improved.

This marks the increasingly mature production and application of Baosteel's ultra-thin oriented silicon steel products, breaking the long-term monopoly of imported products in the 0.2mm-oriented silicon steel in the field of power transformers, which is also the use of 0.2mm ultra-thin domestic industrial power products Oriented silicon steel to make iron core.

The ultra-thin oriented silicon steel represented by B20R070 is an important product representing the technical level and production organization capacity of Baosteel, and is also the main product after the subsequent engineering of oriented silicon steel is put into production. At present, this product is mainly used in S15 energy efficiency distribution products.

In order to promote the application of ultra-thin oriented silicon steel in the field of large-scale power transformers, expand the high-end user market, and accumulate practical application experience, in the fourth quarter of last year, Baosteel Co., Ltd. combined with the renovation and transformation of the main transformer of the 2030 cold rolling unit, decided to install two large In the change, the B20R070 ultra-thin oriented silicon steel is used to make the iron core instead of the original conventional iron core scheme. The smooth implementation of the project has realized the extension of the 0.2mm oriented silicon steel downstream market from power distribution to large power transformers.

At present, the production of ultra-thin oriented silicon steel and the application of transformers are mastered by only a few steel mills and transformer companies at home and abroad, and the technical blockade is tight and the exclusivity is strong.

Through the renovation and transformation of the main transformer of the 2030 cold rolling unit, Baosteel Co., Ltd. has successfully implemented the application of domestic ultra-thin oriented silicon steel by cooperating with transformer manufacturers, and can guide users in domestic and foreign markets to use domestic ultra-thin oriented silicon steel to manufacture power transformer cores. Baosteel's ultra-thin oriented silicon steel is widely used in the field of electric power transformation.

The 2030 cold rolling production line is the throat unit of Baosteel's cold rolling unit, and its main step-down station is equipped with 2 main transformers. After 30 years of intensified operation aging, in order to ensure the safe and reliable operation of the cold rolling mill's power supply and distribution system and eliminate failures, Baosteel decided to use the annual and major repairs of the unit to implement energy-saving and environmental protection upgrades on the main transformers No. 1 and No. 2 .

The No. 1 main transformer was put into operation with load on December 2 last year. On the 12th, the whole main plant load test for single main transformer belt was started. The operation has been in good condition and the data collection is accurate. In the next phase, Baosteel will also strengthen technical exchanges and cooperation with the main transformer manufacturer in all aspects, and promote the completion of the No. 2 main transformer project. With strict on-site management and stable operation of the main transformer, the ultra-thin ultra-thin oriented silicon steel On-site application, product quality verification and market expansion. (Source: Electrical Steel Pilot)

Jiangyin hengtong was found in 1989.it is a large scale , standardization, consideration, and information all constitute important factors in the development of steel managing enterprises. The company located in jiangyin city-the NO.1 of the TOP 100 cities in China ,faces the shanghai on the east and near the changjiang river on the north ,with the ascendant geographical location and convenient transportation makes goods reach to destination very quickly.

Now we have two companies, jiangyin hengtong ,jiangsu smart motor technology（jiangsu shuaijin） ,about 200 employees ,30% of them is professional and technical talents.jiangyin hengtong is as a window of the group . it got the ISO9001 ROHS SGS ISO14001 IATF16949 and the horner of jiangyin high-tech enterprise,jiangyin key enterprise . it covers about 1300 are and has two set of slitting machine , twelve sets of annealing equipment .more than 50 sets of punching machine and cutting machine. We can produce most of kinds EI type ,UI type and other silicon steel sheet in the market ,Contain the thickness 0.23mm 0.30mm 0.35mm 0.5mm etc .annual quantity is about 50000 ton.

In the past 20 years, jiangyin hengtong made a great achievement in the filed of transformer industry , Power tools industry, household appliances industry, welding industry, automobile manufacturing industry .well-known and trust by the domestic and foreign enterprises ,such as microtek ,luminous , leader,EAGTOP,GREE etc. The products has been sold to US, Brazil ,India ,EGYPT,RUSSIA AND POLAND. Jiangyin hengtong has been the most important punching company in the word .