Automatic Vertical Insulating Glass Production Line Used for Making
Double Glazing Glass
Product overview of insulating glass production line
After the original glass piece is cut, it enters the insulating
production line mainly through cleaning, drying, making the spacer
frame, filling the desiccant, the first sealing (applying butyl
rubber), inspection, putting the frame and closing sheet, pressing
the sheet, the second sealing (polysulfide rubber or silicone
rubber), and the lower sheet.
The insulating glass production line is mainly used for processing
and making insulating glass. The processed products are of high
quality and fast processing speed.
Technical data of Automatic insulating glass production line
| Max. glass size | 2500mm*3500mm |
| Min. glass size | 280mm*400mm |
| Glass thickness | 3-15mm / 19mm |
| Insulating glass thickness | 50mm / 60mm |
| Glass washing speed | 2-10m/min |
| Glass conveyor speed | 45m/min |
| Washing brushes | 3 pairs |
| Water supply | Water consumption:0.5t/h conductivity:40μs/cm |
| Air supply | Flow: 0.8m/min |
| Air pressure | ≥0.8MPa |
| Total power | 3P 380V 50HZ 40KW |
| Dimension | 23500*3500*3700mm |
| Weight | 6500kg |
Product Details of Vertical Insulating glass production line
Vertical insulating glass production line can simultaneously press
two insulating glasses for glass below 1.5 meters and
simultaneously inflate two insulating glasses.
It can realizes online inflation and automatic detection of argon
gas content.
1.Air-buffered backrest prevents glass scratches and glass wheel
marks
2.The machine adopts Siemens control system, equipped with high
resolution touch screen.
3.Washing online and offline Low-e glass,automatically recognizes
Low-e film
4.The washing machine uses six soft (Low-e) brushes with the 0.1mm
diameter only.can wash low-e glass, flat glass, tempered glass and
so on. It has a diameter of less than 0.1mm bristles, never damage
glass, especially for low-e glass.
5.Timing belt is jagged, making the pressing more accuratly.
The pressing box uses servo motor and timing belt to support
pressing IG units.
Servo motor can be accurately calculated the thickness of the glass
and aluminum spacer. Compared with traditional hydraulic station,
servo motor can guarantee the precise working pressure and protect
the glass from damage, at the same time increasing the working
speed.
6.Automatic Insulating glass production line adopt CNC technology
into the pressing board. We designed the adjustable points inside
the pressing board to keep the back plate straight all the time.
7.Automatic inflating function inside the slab, automatically
inflating according to the size of the glass, improving inflation
efficiency and gas utilization rate.The IG line fills argon gas
with 22s only for one piece of 1m*1m double glazing glass.
Main functions
1)Making low-e IG units
2)Making four-sides IG units
3)Making shaped IG units
4)Making double IG units
5)Making triple (3-layer) IG units
6)Filling argon gas automatically
Company introduction
Jinan Lijiang Automation Equipment Co., Ltd. is an enterprise which
integrated glass processing equipment research and development,
sales and service into a whole.
Now, our friendly partners include North Glass, Xin Fuxing, Yaohua,
Dalian Huaying, Beijing Guanhua, Shanghai Hao Jing, Sichuan Li
Hehua and other well-known enterprises. Since the establishment of
the company, our products have been exported to Europe, America,
South America, the Middle East, Southeast Asia, India, nearly 30
countries and regions.
exhibition
