Cisco Gigabit Switch C9300-24P-A network switch 9300 24 Port POE+
Gigabit Ethernet Switch support C9300-NM-8X PWR-C1-715
SD-Access: The Cisco 9300 Series Switches form the foundational building
block for SD-Access, CIS’s lead enterprise architecture:
Policy-based automation from edge to cloud
Simplified segmentation and micro-segmentation, with predictable
performance and scalability
Automation through the CISCO Application Policy Infrastructure
Controller Enterprise Module (APIC-EM)
Policy handled through the CISCO Identity Services Engine (ISE)
Network assurance provided through the Network Data Platform
Faster launch of new business services and significantly improved
issue resolution time
SD-Access Embedded Wireless: The CISCO 9800 Wireless Controller
Software package can be installed on CISCO 9300 series switches to
enable wireless controller functionality for distributed branches
and small campuses. Once installed Wireless Controller running on .
9300 can support up-to 200 APs and 4000 Clients. Maximum two
Wireless Controllers can be enabled per site on two different .
9300 which will increase to scale to 400 APs and 8000 Wireless
Clients. C9800 Wireless Controller Software Package will enable
Wireless Functionality only for SD-Access deployments with two
supported topologies:
C9800 Wireless Software Package can be enabled on C9300 series
switches functioning as
Co-Located Border and Control Plane
C9800 Wireless Software Package can be enabled on C9300 series
switches functioning as Fabric in a Box
Plug and Play (PnP) enabled: A simple, secure, unified, and
integrated offering to ease new branch or campus device rollouts or
updates to an existing network
Advanced security
Encrypted Traffic Analytics (ETA): You benefit from the power of
machine learning to identify and take actions toward threats or
anomalies in your network, including malware detection in encrypted
traffic (without decryption) and distributed anomaly detection
Support for AES-256 with the powerful MACsec 256-bit encryption
algorithm available on all models
Trustworthy systems: Hardware anchored Secure Boot and Secure
Unique Device Identification (SUDI) support for Plug and Play, to
verify the identity of the hardware and software
Product Code | C9300-24P-A |
Product Description | .9300 24-port POE, Network Advantage |
Total 10/100/1000 or Multigigabit copper ports | 24 CIS POE |
Default AC power supply | 715W AC |
Available PoE power | 437W |
Dimensions (H x W x D) | 1.73 x 17.5 x 17.5 Inches |
Weight | 16.33 Pounds |
| |
Description | Performance |
Switching capacity | 208 Gbps on 24-port Gigabit Ethernet model 256 Gbps on 48-port Gigabit Ethernet model 640 Gbps on 24-port Multigigabit Ethernet model 580 Gbps on 48-port 2.5G (12 Multigigabit) Ethernet model 640 Gbps on 48-port 5G Ethernet model All models are wire-speed nonblocking performance |
Stacking bandwidth | 480 Gbps |
Total number of MAC addresses | 32,000 |
Total number of IPv4 routes (ARP plus learned routes) | 32,000 (24,000 direct routes and 8000 indirect routes) |
IPv4 routing entries | 32,000 |
IPv6 routing entries | 16,000 |
Multicast routing scale | 8000 |
QoS scale entries | 5120 |
ACL scale entries | 5120 |
Packet buffer per SKU | 16 MB buffer for 24- or 48-port Gigabit Ethernet models 32 MB buffer for 24 and 48-port Multigigabit |
FNF entries | 64,000 flow on 24- and 48-port Gigabit Ethernet models 128,000 flows on 24-port Multigigabit |
DRAM | 8 GB |
Flash | 16 GB |
VLAN IDs | 4000 |
Total Switched Virtual Interfaces (SVIs) | 2000 |
Jumbo frames | 9198 bytes |
Total routed ports per 9300 Series stack | 208 |
