Guide wire rupture tester
5.7 inch (120 × 90) single color LCD touch screen is adopted, and
Chinese menu is displayed. Nominal specification, test times,
left-hand, right-hand, time, calibration. The menu on the LCD is
controlled by the keyboard, and the test results are printed on
board. It fully complies with the test requirements specified in
Appendix F of yy0450.1-2003.
Number of test cycles: 1-20;
Set the number of turns: 5-20;
Guide post diameter: 10 times of guide wire diameter;
After the test, observe whether the guide wire breaks and the
surface coating falls off;
Net weight: 8kg
Boundary dimension: 400 × 290 × 240 (mm)
Partial list:
1. One main machine 2. One roll of printing paper 3. One set of
clamps 4. One set of weights 5. One year warranty
6. Operation instructions 7. Free upgrade service according to
national standard
