Heavu Duty Gas Inlet Casing , Turbocharger Spare Parts Mixed Flow Turbine Type

Heavu Duty Gas Inlet Casing , Turbocharger Spare Parts Mixed Flow Turbine Type

1. Increase of the compressor pressure ratio
2. High efficiency
3. Low noise emissions
4. Simple installation to the engine
5. Easy maintenance
6. Long service life
7. wide application: Marine propulsion, excavators, locomotives, power generation, off-road vehicles, machanical drive, mining, marine gensets.

Brief introduction of Marine turbocharger:

Marine turbocharger/Exhaust gas turbochargers operate at high speeds, high exhaust gas temperatures, high air and exhaust gas flow rates, and high flow rates.

Generally, the pressure of the exhaust gas is 0.25-0.45 MPa, and the exhaust gas temperature is 500-600 °C. The speed varies with the size of the Marine turbocharger / supercharger.

The maximum speed of the large-sized supercharger is 10000 r/min, and the maximum speed of the small-sized supercharger can reach 40,000~50000r/min.

Therefore, the marine turbocharger/exhaust gas turbocharger is a precision machine.

When the diesel-exhaust turbocharger combination is in operation, the marine turbocharger/exhaust gas turbocharger is prone to failures such as turbine casing corrosion, bearing damage, blade damage, gas seal damage, and supercharger vibration.

The daily good maintenance management can reduce these failures.

• High efficiency and small size;
• Lower fuel consumption;
• pressure lubricated internal bearings;
• lubricated via the engine oil systme of the engine;
• The T- CR series turbochargers are used on high-speed diesel engines and on gas engines.
• Applicated in Marine engine, rail as well as earth-moving and mining equipment

SUNJUN MARINE CO.,LTD. is located in Zhenjiang, China. It is a professional manufacturer of marine turbochargers. We adhere to the principle of "Quality First, Customer First, Dedicated Service, Reasonable Price" to serve customers.

Years of professional experience, in-depth knowledge of turbochargers, advanced equipment and well-trained staff enable us to further analyze our customers ’requirements and provide what they need. All spare parts are rigorously / carefully inspected / checked before delivery to ensure that no faulty / wrong parts will appear. We know that customer time / reputation is important. This is why we are very careful when preparing spare parts.

After years of continuous efforts, we have established an effective quality control system. Reliable quality and professional service have always been our goals.

Buying from us is just the beginning. We will provide you with timely and valuable support and after-sales service 24 hours. You are not only our supplier, but also our reliable partner in China.