SH0248C of solidifying point cold filtration point tester is based
on national standard national standard GB/T510 "solidifying point
measurement of oil products and on the basis of SH/T 0248, adopt
modern advanced technology, mechanical, optical, electronic and
computer technology into an organic whole, can automatically finish
the solidifying point and cold filtration point of petroleum
products testing, the instrument adopts photoelectric detection
technology, automatic inclined glass tube method, imported
compressor refrigeration system to ensure that meet the
requirements of refrigeration and depth.
Instrument features:
embedded system design, using imported PT100 temperature sensor,
automatic detection throughout the test;
Color touch screen;
The test results can be stored;
You can view historical data;
Printing results on the instrument, mechanical automatic mixing,
experimental results can be exported through the U disk, stored in
the computer can be compared for many times.
1. Upgraded to 7-inch TFT color LCD display;
2. Refrigeration mode: fully enclosed and efficient refrigeration
compressor.
3. Cold trap for test: 2.
4. Detection method: spectral detection
5, can store 199 groups of historical data, convenient query;
At the same time can be equipped with U disk output function.
6, standard micro printer automatic measurement automatic thermal
printing (standard)
7. After the completion of the test, if there is no personnel to
operate, set the automatic closing time of the refrigerator within
0-50min to avoid frequent opening of the compressor and prolong the
service life of the instrument.
8, test interval: cold filter point 1℃ freezing point 2℃.
9, temperature sensor: imported PT 100 probe
10, refrigeration medium: metal bath
★11. Laser printer interface, can be linked to HP1108 laser printer
(optional)
★12, with date password setting function.
13, standard micro printer automatic measurement automatic thermal
printing
★14, with TCP network transmission function
★15, can be uploaded and connected to LIMS system
★16. Can expand the memory of the microcomputer to 16G
Technical parameters:
| Model | SH0248C of solidifying point cold filtration point tester |
| Applicable standards | GB/T510, SH/T 0248 |
| Temperature measurement range | -70 ~ 50℃ |
| Pressure measurement range | 0 ~ 200.0 kPa; |
| Resolution | 1 pa |
| Number of test samples | 2 |
| Temperature measuring element | PT100 |
| Cooling method | air cooling |
| Refrigeration mode | compressor refrigeration |
| Printing | dot matrix printing of 20 Chinese characters |
| Display | 128×64 Chinese characters display |
| Storage mode | 199 sets of historical data can be stored for easy query; |
| Results output | at the same time can be equipped with U disk output function,
output to the PC for long-term storage |
| Data extension | laser printer interface, can be linked to HP1108 laser printer
(optional). |
| Output format | the output format of the result USB flash disk is CSV or EXCEL. |
| Data protection | with date password setting function.
|
| Standard printing | standard micro printer automatic measurement automatic thermal
printing
|
| Remote upgrade | with TCP network transmission function, can be later software
remote upgrade
|
| Data management | can be connected to LIMS system
|
| Data memory | microcomputer instrument memory can be expanded to 16G. |
| | |
packing list
| S/N | Name | Unit | Quantity | Remarks |
| 1 | Automatic cold filter point tester | set | 1 | |
| 2 | Cold filtration point suction filtration device | set | 1 | |
| 3 | Cold filter point test tube | piece | 2 | |
| 4 | Pipette | piece | 2 | |
| 5 | Suction head assembly | set | 2 | Brass housing, nut, strainer, etc |
| 6 | Freezing point test tube | set | 2 | |
| 7 | Condensation point sensor | set | 2 | |
| 8 | Plastic tie | piece | some | |
| 9 | Silicone tube left and right | piece | 2 | |
| 10 | Fuse | piece | 2 | Length and width: 100mm x2mm |
| 11 | Power cord | piece | 1 | |
| 12 | Instruction | copy | 1 | |
| 13 | packing list | copy | 1 | |
| 14 | Certificate warranty card | copy | 1 | |
Company Introduction
Shandong Shengtai Instruments Co., Ltd. is specialized in the
research and production of experimental testing instruments and
industrial testing instruments. It is a professional instrument
company integrating instrument research and development,
manufacturing, sales and service. Its products are widely used in
food, flour, grain and oil, Feed, electricity, petrochemical,
industrial oil, aerospace, coal quality and other industries.
For more than 10 years, Shengtai has always been adhering to the
"first-class service, customer first" as the purpose, "reasonable
price, honesty and trustworthiness" as the business policy. Adhere
to technical innovation, with rich knowledge of the technical team
and experienced, thoughtful after-sales service team.
Shengtai instrument as one of the most large-scale and competitive
enterprises in the industry, with the strength of technology
research and development, professional technical knowledge and
innovative design concept, in the model improvement, Significant
technical breakthrough has been achieved in the development of
function expansion and intelligent control system.
OUR service
After-sales service commitment, our company to sell the product
after-sales service commitment: warranty period of one year,
long-term technical support outside the warranty period. During the
warranty period, the seller shall bear the cost of the replacement
of the equipment, the freight and maintenance of the instrument;
outside the warranty period, the seller shall waive the maintenance
fee and charge only the cost of the basic materials and freight
charges when the instrument is malfunctioning and the seller shall
not charge the maintenance fee during the warranty period.
Packaging & Delivery
1. Out packing: Standard export wooden case.
2. Inner packing: With careful stretch film wrap product, hard wood
board+ strong bandage to fix corners.
3. Checking teams: Specialized staff to inspect and classified your
goods.
4.Port Any port of China
Lead Time :
| Quantity(Sets) | 1 - 1 | 2 - 5 | 6 - 10 | >10 |
| Est. Time(days) | 6 | 20 | 30 | To be negotiated |
Contact us
Shandong Shengtai Instrument Co.,ltd
ADD:6-8 time base NO.15 lanxiang road tianqiao Area Jinan city
TEL:+86 0531-85919987 85929987
FAX:+86 0531-85957987
Whatsapp/facebook:+86 13370527859
QQ:3206156217
Email:3206156217@qq.com
Web:www.labtool.net/en
