SH126E lubricating oil high temperature foam tester
Product Details
The applicable standard of SH126E high temperature foam
characteristic tester: ASTM D6082 SH / T0722 Lubricant high
temperature foam characteristic tester is suitable for testing the
foam characteristic of lubricating oil at 150 ℃. Heat the sample to
49 ° C, cool it to room temperature after 30 minutes of constant
temperature, and then transfer the sample to the specified
measuring cylinder and heat to 150 ° C, pass dry air into the metal
diffusion head, ventilate for 5 minutes, and measure the static
state immediately before stopping The amount of foam, the amount of
exercise foam, and the static amount of foam after the cessation of
ventilation for a specified time, the time when the foam
disappears, and the percentage increase in total volume.
Features
1. The instrument is split type, including heating bath and
accurate flow meter.
2. High temperature resistant borosilicate glass cylinder, Φ300 ×
450mm, meets the standard requirements;
3. Environmentally friendly oil bath heating, reducing the damage
of oil fumes to the human body, efficient thermal insulation
effect;
4. Stainless steel heater;
5. Air filter with glass wool;
6. Microprocessor thermostat and PID control, digital display
temperature, accuracy 0.1 ℃, Pt100 RTD temperature probe;
Technical Parameters
1. Temperature control method: imported PID digital display
thermostat
2. Temperature control accuracy: ± 0.1 ℃
3. Heating method: oil bath heating
4. Overall power: 2.5KW5, Working unit: 2 tubes
6. Flow control: precision flow meter
7. Working power supply: AC220V / 50Hz8, temperature range: 150 ±
0.1 ℃
