High Automation Mobile Crushing Plants Easy Maintenance Simple
Structure
Features of MP-PH Series Mobile Impact Crushing Plants:
1. The reliable processing plant MP-PH carries on the advanced
Sino-German technology concept. It can be optimally used as a
primary crushing plant, the optional high-performance magnet allows
for an efficient employment in the recycling industry. The plant is
eminently suitable for the processing of blasted natural stone and
provides an excellent final grain size.
2. The MP-PH crushing plant impresses with a robust and functional
design in a sturdy constructive form, and simultaneously can be
operated economically.
3. Both the dynamic control system and the optimized crushing
cavity geometry of MP-PH crushing plant ensure maximum throughput
continuity and a homogenous final grain size.
4. MP-PH Series Mobile Impactor Plant, the cost of which has been
thoroughly optimized, convinces by its stability, wear cost which
are considerably below average, long maintenance intervals and
minimum set-up times.
5. MP-PH Series Mobile Impactor Plant is one of the most economical
impact crushers of its class; it is a truly world-class product.
All in all the MP-PH Series Impactor Plants convince by a flexible
applicability, it processes limestone, reinforced concrete, bricks
and asphalt with the directly driven impact crusher into
high-quality final grain sizes. An excellent mobility, a high
performance at a comparably low weight and an efficient drive
permit a remarkable economic crushing.
Innovative Features of MP-PH Series Mobile Impact Crushing Plants:
1. The vibration feeder is fitted with a two-deck grizzly section
for an optimum pre-scaling, thus maximizing the total performance
and reducing wear.
2. The material, which has already the required grain size, is
conveyed via a bypass past the impact crusher directly to the
discharge chute. Thus the efficiency of the complete plant is
increased.
3. The MP-PH crushing plant is fitted with the field-tested impact
crusher. The hydraulic controlled impact crusher guarantees a
constant product quality and a high availability.
4. The active hydraulic permit a trouble free material flow via the
movable inlet plate of the impact crusher.
5. The diesel-direct drive in combination with a CATERPILLAR motor
allows for a maximum performance at a small amount of space.
6. The processing plant is easy to operate with the remote control.
7. Magnetic separator, lateral discharge belt and water spray
system are optionally available as approved Sino-German modules.
8. For the optimization of performance and availability the mobile
processing plant is operated by an intelligent control in the
background.
Technical Data of MP-PH Series Mobile Impact Crushing Plants:
| MP-PH Series Mobile Impactor Plants | MP-PH 10 | MP-PH 14 |
| Impact crusher | AP-PH-A 1010 | AP-PH-A 1414 |
| Feed opening size(mm×mm) | 810×1030 | 1025×1360 |
| Max feed size(m3) | 0.3 | 0.5 |
| Max edge length in one direction(mm) | 800 | 1000 |
| Crushing capacity(t/h) | up to 250 | up to 480 |
| Drive | diesel-direct | diesel-direct |
| Driving Unit |
| Engine | CAT C9 | CAT C18 |
| Performance (kw) | 242 | 470 |
| Feed hopper |
| Hopper volume(m3) | 4.8 | 8.5 |
| Grizzly feeder with pre-screening(two-deck) |
| Drive | hydraulic | hydraulic |
| Main conveyor belt |
| Discharge height(mm) | 3100 | 3500 |
| Drive | hydraulic | hydraulic |
| Side conveyor belt (option) |
| Discharge Height(mm) | 1900 | 3500 |
| Drive | hydraulic | hydraulic |
| For transportation the head-piece can be folded |
| Crawler unit |
| Drive | hydraulic | hydraulic |
| Permanent magnetic separator |
| Magnetic separator | option | option |
| Dimensions and weight |
| Working dimensions |
| -length (mm) | 14600 | 18000 |
| -width (mm) | 4500 | 6000 |
| -height (mm) | 4200 | 4800 |
| Transport dimensions |
| - length (mm) | 13300 | 17000 |
| - width (mm) | 3350 | 3730 |
| - height (mm) | 3776 | 4000 |
| Approx weight (t) | 43 | 70 |
Note: Capacity is total tons per hour passing through crusher at
open circuit when bulk density of feeding is 1.6t/m³. Capacities
are relative to physics character and type of feeding, feeding size
and composition.
MP-PH mobile crushing plants.pdf
