SMX Series Rock Gyratory Crusher 1120-6813t/H For Primary Crushing
Gyratory crusher is a large-scale crushing machine used for primary
crushing of various hard ores or rocks, the feed material will be
compressed, broken and bended through gyrating movement of breaking
head within the chamber.
Product Brief Introduction of SMX Series Gyratory Crusher:
Gyratory crusher is a large-scale crushing machine used for primary
crushing of various hard ores or rocks, the feed material will be
compressed, broken and bended through gyrating movement of breaking
head within the chamber. The top of main shaft (assembled with
breaking head) is supported within the bushing which is installed
in the middle of spider arm; the bottom of the main shaft is
mounted in the eccentric hole of bushing. The breaking head gives a
gyrating movement around axis line of the machine while bushing
rotating, and feed material can be crushed continuously, therefore
it is more efficient than jaw crusher.
Features and Benefits of SMX Series Gyratory Crusher:
Due to high reduction ratio, a smaller product size is produced.
This puts less pressure on conveyor belt transfer points, which in
turn leads to less materials handlings costs, less down-time and
less maintenance costs.
Special liner & crushing chamber configuration produces more
valuable cubically shaped, lumpy product and less fines.
Special design means crushers do not have to be choke-fed,
simplifying plant design & eliminating the need for intermediate
stockpile.
The use of spherical bearings instead of a bush arrangement,
eliminates point loading in this area – longer bearing life, lower
downtime, lower maintenance.
The spherical bearing results in more eccentric movement higher up
in the crushing chamber, resulting in the effective nipping and
crushing of very large feed sizes.
The spherical bearing allows for smaller gap settings at the
discharge, leading to high set under & smaller product sizes.
Heavy duty gyratory design is ideal for crushing hard and abrasive
material like iron ore.
Technical Data of SMX Series Gyratory Crusher:
| Model | Size of Feed Opening(mm) | Discharge Range (mm) | Capacity (tph) | Motor Power (kw) |
| SMX810 | 1100 | 140-170 | 1120-1880 | 355 |
| SMX830 | 1300 | 140-170 | 1560-2370 | 355 |
| SMX1040 | 1400 | 160-210 | 2081-3015 | 450 |
| SMX1050 | 1500 | 160-210 | 2350-3380 | 450 |
| SMX1150 | 1500 | 175-220 | 3805-4930 | 800 |
| SMX1450 | 1500 | 200-250 | 5315-6813 | 1100 |
Note: The above capacities are based on an assumed feed where 100%
ofthe feed passes 80% of the feed opening. 80% of the feed passes
60%of the feed topsize, and 50% of the feed passes a sieve size
that is 10%of the topsize. The capacities are for feed materials
with a bulk densityof 1.6 metric tons per cubic meter (100 pounds
per cubic foot).All capacities are calculated at a maximum throw
for each respective machine. All capacities are relative to
individual application. Materialcharacteristics, feed size,
distribution, work index, percent moisture,and feed method are
factors when considering total crusher capacity.
Please consult Sanme to verify your capacity requirements.
SMX series gyratory crusher.pdf
