2.0 3.0 Ftth SM/MM SX/DX Connectors SC / LC / FC / ST Fiber Optic
Patch Cables Cord
Description:
The SM SX pvc 3.0mm, 2.0mm Patch cord are used to connect high speed
and legacy networks like Gigabit Ethernet,Fast Ethernet and
Ethernet.The patch cords are terminated with standard connector
which gives optimum optical performance.
FC patch cord is a fiber optic cable used to attach one device to
another for signal routing.
FC stands for Fixed Connection. It is fixed by way of threaded
barrel housing. FC connectors are generally constructed with a
metal housing and are nickel-plated.
APC stands for Angled Physical Contact The end faces are still
curved, but they’re angled at an industry-standard eight degrees.
This maintains a tight connection. These connectors are preferred
for CATV and analogue systems.
A patch cord is a fiber optic cable used to attach one device to
another for signal routing. Normally, there are 4 types connector:
FC/SC/LC/ST.. 3types ferrule: PC, UPC, APC…
FC stands for Fixed Connection. It is fixed by way of threaded
barrel housing. FC connectors are generally constructed with a
metal housing and are nickel-plated.
PC stands for Physical Contact.With the PC connector, the two
fibers meet as they do with the flat connector, but the end faces
are polished to be slightly curved or spherical. This eliminates
the air gap and forces the fibers into contact
UPC stands for Ultra Physical Contact.The end faces are given an
extended polishing for a better surface finish. These connectors
are often used in digital, CATV, and telephony systems.
APC stands for Angled Physical Contact The end faces are still
curved, but they’re angled at an industry-standard eight degrees.
This maintains a tight connection. These connectors are preferred
for CATV and analogue systems.
II. Features:
Complying with IEC, Telcordia GR-326-CORE, YD-T
1272.3-2005,standard.
Low insertion loss, high return loss
High dense connection, easy for operation
High credibility and stability
Good in repeatability and exchangeability
III. Application:
Testing equipment
FTTX+LAN
Optical fiber CATV
Optical communication system
Telecommunication
| Model NO. | FO patch cord
|
| Style | LC,SC,ST,FC.MU,MPO, SC/APC,FC/APC,LC/APC.MU/APC Duplex MTRJ/Female,
MTRJ/Male |
| Fiber Type | 9/125 SMF-28 or equivalent (Singlemode) OS1 50/125, 62.5/125
(Multimode) OM2&OM1 50/125, 10G (Multimode) OM3 |
| Cable Type | Simplex, Duplex (Zipcord) Φ3.0mm, Φ2.0mm, Φ1.8mm Φ1.6mm PVC or LSZH
Φ0.9mm, Φ0.6mm buffered fiber PVC or LSZH |
| Polishing Manner | UPC,SPC,APC (8°& 6°) |
| Insertion Loss | ≤ 0.1dB (For Singlemode Master) ≤ 0.25dB (For Singlemode Standard)
≤ 0.25dB (For Multimode) Tested by JDS RM 3750 |
| Return Loss (For Singlemode) | UPC ≥ 50dB SPC ≥ 55dB APC ≥ 60dB (typ.65dB) Tested by JDS RM3750 |
| Repeatability | ±0.1dB |
| Operating Temperature | -40C to 85C |
| Geometry Requirement (For Singlemode) | Ferrule Endface Radius 7mm ≤ R ≤ 12mm (For APC) 10mm ≤ R ≤ 25mm
(For Standard) Apex Offset ≤ 30 μm (For Master) Apex Offset ≤ 50 μm
(For Standard) Undercut -50nm ≤ U ≤ 50nm Tested by DORC ZX-1 |
