576x576mm portable aluminum panel high definition P3 SMD 2020 full
color indoor stage led concert screens
1. Error detection and monitoring:it can monitor the inner
temoerature,voltage,cooling fans etc and error detection
automatically.
2. Energy saving:low electric current,high-brigh lamps,equipped
with PFC swithing power supply,save 30% electricity.
3. Color correction:support dot-to-dot correction,guarantee the
consistence of LED color and brightness,No chromatic aberration for
new screens3..
4.. Good LEDs:use DIP346 LEDs,it has excellent performance in
antistatic ability and UV protection;Waterproof grade IP65,all
weather available.
5. Dual back-up:both power supply and system dual back-up are
optional,reliable performance.
6. High refresh rate,high gray level:it can reach 16bit by using
PWM driving IC,refresh rate is more than 1000HZ,
the gray level is still high even under the condition of low
brightness
♦ Product specification
| indoor SMD P3 |
| Lamp size | 2121 |
| Resolution/mm | 3 |
| Pixel configuration | RGB 3 in 1 |
| Pixel density/pixels/m² | 111111/m² |
| Module resolution | 64x64 |
| Module size/mm | 192x192mm |
| View distance | ≥3m |
| Single point brightness adjust | Can be added |
| Single point color adjust | Can be added |
| White balance brightness | >2000cd/㎡ |
| Color temperature | 6500K-9500K |
| Horizontal view angle | 120(degrees) |
| Vertical view angle | 60(degrees) |
| Signal Process bit | 10 or 14 bit |
| Grey process | 1024x1024x1024 16834x16834x16834 65536x65536x65536 |
| Control distances | Internet cable:100m, multimembrane:500m, monofilm:5km |
| Driving mode | Constant driving current |
| Scanning mode | 1/8 |
| Frame rate | 60Hz |
| Refresh frequency | >3000Hz |
| Control mode | Computer synchronous |
| Brightness adjusted range | Manual, automatic operation, stepless continuous adjusted
255 steps. No grey loss |
| Out of control point | <1/10000 |
| Working hours | ≥72hours |
| Mean Time Between Failure | >5000hours |
| Life time | 100000hours |
| Life-all-white(brightness halving) | 50000hours |
| Environment temperature range | Operating temperature range: -20-45℃ Storing temperature range:
-30-65℃ |
| Maximum power:/㎡ | <900W |
| Average power:/㎡ | <300W |
| Self-check technology | LED spot self-check, communications check, power check,
temperature monitor(need customization) |
| Remote monitoring | Remote supervision and control, record potential fault,
send out warning signs to the operators.(need customization) |
| Software environment | WindowsNT,Windows1999,WindowsXP |
| Luminous point width between centres | Deviation<3% |
| Brightness uniformity | <10% |
| Color uniformity(chromaticity coordinate) | ±0.003 |
| Power supply request | AC85-264V(50Hz-60Hz) |
| Contrast | (1000:1) |
| System protection | Moistureproof,dustproof,high temperature
protection,anti-corrosion,anti-burning,anti-static,anti-vibration |
| Humidity(working) | working:10-95% |
| Humidity(storing) | storing:10-95% |
Our case
♦ Production process:
1) Incoming Inspection→2) SMD→3) Plug-in
→4) Wave Soldering→5) After Welding→6) Testing
→7) Semi Finished Aging→8) Module Assembly
→9) Gluing→10) Finished Aging→11) Detection Finishing Warehousing
♦ Packaging and shipping
Wooden case or flight case package are available.
Shipping by sea,air or DHL,multiple shipping ways for your choice.
♦ Why choose us:
Continues Quality
With more than 10 years experience in led display
producing,equipments are updated regularly.What’s
more,unique standardized and module production ensure our products
continuous quality.
Competitive Price
With large scale production capacity and professional production
technology,our company have built
effective modular production.We always stick to promote the
technical innovation and reduce cost to
benefit customers.
Fast Delivery
Once we promise the delivery date,we will try our best to fulfill
it.Special procedures such as emergency
inventory will be used to maintain your uninterrupted supply of the
products.
Perfect Service
Pre-sales:Your purchasing requirements will be highly valued and
we’ll recommend suitable products to
you.
After-sales:We will track the products usage and then constantly
perfect our products.
FAQ
Q1: Are you a trading company or manufacturer?
A1: Focus Bell is a professional LED display manufacturer, we have
our factory and based on the High-tech Park. We have more than 5
years experience in LED display industry.
Q2: What is your control system? Is it easy to use?
A2: We use Novastar controlling system. Support
APP/Phone/Wifi/PC/Cloud and other types of terminals to control
videos. And we will choose the best processor and system for the
screen to make it easier and convenient.
Q3: What is your service? How could we get a screen?
A3: 1. Getting your requests and find the best solution for you.
2. Arrange fast delivery and track the order.
3. Guide you how to install the screen and software.
4. Track your after-sale use and supply the best service for you.
Q4: How about the delivery time?
A4: Commonly 10-25 days after we receiving your advanced payment.
If there is special delivery time, it must be the special quantity
and items. We will inform you in advance.
