LIYI White High Temperature Laboratory Oven Circulation Fan Touch
Screen Controller
Product Overview
250 Degree High Temperature Explosion-proof Oven with Circulation
Fan is able to accurately simulate a wide range of complicated
natural environments, and is suitable for reliability test in
industrial products. Meet GB5170.2.3.5.6-95 standard requirements
of environmental
testing equipment and test methods.
Product Application
Applicable to environmental adaptability and reliability test in
such industrial units as electronics, electrical appliance,
battery, plastics, food, paper product, vehicle, metal, chemistry,
building material, research institution, inspection and quarantine
bureau, university etc.
Characteristics:
1. Automatic temperature control with digital thermal-sensor
2. Excellent thermal insulation property of ovens wall, lower
energy consumption,
3. Be able to pre-set temperature, digital temperature display with
LED panel.
4. Temperature value flashes on indicator when reach preset value.
5. Circulation fan facility to keep even temperature and uniform
heating
High temperature control accuracy:
Using SUS304 stainless steel heater as the heating element, the
intelligent temperature controller collects the temperature value
in the test chamber in real time, compares it with the temperature
setting value on the controller, and controls the on-off time of
the SSR through PID calculation.
In this way, the output heat of the heater is controlled. At the
same time, the forced hot air circulation mode is adopted to
achieve the purpose of operating the temperature inside the box
according to the setting program.
Operating mode:Fixed value operation
Safety device:
Leakage protection switch: The circuit breaker with leakage, short
circuit and overcurrent protection is activated to effectively
protect all electrical components;
Over-temperature protector: independent over-temperature protector,
when the temperature is abnormally too high, the heater power
supply is disconnected;
Safety device: grounding protection, heater short circuit
protection, motor overload protection;
Specifications:
| Model | Inner Size W*H*D(cm) |
External Size W*H*D(cm)
| Temperature Range(°C) | Heating up Time | Accuracy (°C) | Uniformity (°C) | Power | Rate of work (kw) |
| LY-645 | 45×40×40 | 66×92×55 |
(A-D) A:200°C B:300°C C:400°C D:500°C
|
RT~100°C About 10min | ±0.3 | ±1% | 220V Or 380V | 3.5 |
| LY-660 | 50×60×50 | 70×125×65 | ±0.3 | ±1% | 4.5 |
| LY-690 | 60×90×50 | 80×156×65 | ±0.3 | ±1% | 5.5 |
| LY-6100 | 80×100×60 | 100×166×75 | ±0.3 | ±1% | 8 |
| LY-6120 | 90×120×60 | 110×186×75 | ±0.3 | ±1% | 10 |
| LY-6140 | 140×120×60 | 160×186×75 | ±0.3 | ±1% | 12 |
| LY-6160 | 160×140×80 | 180×206×97 | ±0.3 | ±1% | 14 |
| LY-6180 | 180×140×100 | 200×200×118 | ±0.3 | ±1% | 16 |
Air supply system:
1. Forced convection level supply air circulation, the motor runs
circulatorilily to drive wind wheel to electric heaters rotor,send
the hot wind into the oven and then inhalt it to air passage after
using to be air source again, thus reduce heat cycle energy loss
and ensure the uniform temperature.When opening or closing the door
may cause disturbance action this system can be used to recover
temperature operation conditions quickly.
2. The motor is imported from Taiwan witch have long axis and can
endure high temperature.
3. The fan is a multipage turbine in high strength, equipped with
adjustable diversion within the boards witch can make the wind road
runs smoothly.
Material of Construction:
(1) Interior material is SUS#304 stainless steel
(2) Exterior material is paint coated steel plate
(3) Insulation Material of imported fire-proof rock wool
(4) Heating Medium: electric heating tube
Our service:
If you face any problems in future during testing process we
promise we will give you a reply within 48 hours and solution
provide within 3 working days. We can offer operation video and
English operation manual. We can provide video-con.
1. Considerate Service Different countries plugs, manually change
the-voltage from 110V to 220V, insurance indicator.
2. Excellent After sale Service: 12 months warranty. Besides, we
can help you to repair your problem controller freely, even it's
not from our factory. What you need to do is to send us the
controller.
3. Commitment:We will sign a letter of commitment while we sign the
contract, which will improve your confidence to us.
4. Good Packaging:
Simulation Animatronic Customer Triceratops are covered with air
bubble film before put them into the wooden case, which not only
has good shock absorption, impact resistance, heat sealing and also
has the advantages of nontoxic, odorless, moisture corrosion, good
transparency etc.
