LIYI 2 Zone Type Thermal Shock Test Chamber High and Low
Temperature Reservation Cabinet
Machine introduction:
Air Cooled 2 Zone Type Thermal Shock Test Chamber High and Low
Tempearture Reservation Cabinet is metal, plastic, rubber,
electronics and other industries necessary testing equipment. For
the continuous exposure to extremely high temperature, very low
temperature environment, instant exposure of the material structure
or composite material tolerance, can be detected in the shortest
possible time due to thermal expansion and contraction caused by
chemical or physical damage.
Air Cooled 2 Zone Type Thermal Shock Test Chamber High and Low
Tempearture Reservation Cabinet meets today's environmental stress
screening requirements and is proven in installations around the
world. It's an economical way to achieve ESS or thermal shocks for
rapid component temperature changes.
The thermal shock chamber of this type is provided with three
dampers, i.e., one for opening or closing the gas outlet and intake
of the high-temperature air conditioning unit, another for the air
outlet and inlet of the outside air supplying unit, and another for
the gas outlet and intake of the low-temperature air conditioning
unit.
Standards:
1. GB/T2423.1-1989
2. GB/T2423.2-1989
3. GB/T2423.22-1989
4. GJB150.5-86
5. GJB360.7-87
6. GJB367.2-87 405
7. SJ/T10187-91Y73
8. SJ/T10186-91Y73
9. IEC68-2-14
10. GB/T 2424.13-2002
11. GB/T 2423.22-2002
12. QC/T17-92
13. EIA 364-32
Specifications:
| Model | LY-TS-42 | LY-TS-80 | LY-TS-150 | LY-TS-225 | LY-TS-300 |
| Inner Size(cm) | 40×35×30 | 40×50×40 | 50×60×50 | 50×75×60 | 100×60×50 |
| Temperature Range | High temperature: +60°C~+150°C (or 180°C) Low temperature: -10°C~-40°C (or -40°C, -50°C,-60°C, -70°C) |
| Temperature Deviation | Less than ±2°C |
| Temperature Conversion Time | Less than 10S |
| Temperature Recovery Time | Less than 5min |
| Test method | 2 zone type or 3 zone type |
| Cooling System | Water-cooled / air-cooled(small chambers only) |
| Power | AC380V/50HZ Three-phase |
Since the cold chamber need huge cooling capacity for shocking, the
chamber’s cooling mode is often designed as air-cooled or
water-cooled.
Air-cooled type need installation environment:
The room must be equipped with exhauster and air conditioner to
make sure heat dissipation timely.
It’s applied to small power products and cool areas.
Water-cooled type need installation conditions:
The customer must prepare water pipe and water tower (located
outside) accordingly.
The water must be pure, or it will block the pipes and result in
some maintenance trouble with time going.
It’s often applied to large system with the features of better heat
dissipation, longer service time, low noise but slightly higher
price if count the fee of water tower and water pipes.
Our service:
During the whole business process, we offer Consultative Selling
service.
1)Customer inquiry process:
Discussing testing requirements and technic details, suggested
suitable products to customer to confirm. Then quote most suitable
price according to customer requirements.
2)Specifications customize process:
Drawing related drawings to confirm with customer for customized
requirements. Offer reference photoes to show the proucts
appearance. Then, confirm the final solution and confirm final
price with customer.
3)Order process:
We offer below business term:
| Accepted Delivery Terms: | FOB, CFR, CIF, EXW, DDP |
| Accepted Payment Currency: | USD, EUR, HKD, CNY |
| Accepted Payment Type: | T/T, L/C, Credit Card, PayPal, Western Union, Cash, Escrow |
| Nearest Port: | Shenzhen, Guangzhou, Shanghai, Qingdao, Tianjing or rquired |
4)Production and delivery process:
We will produce the machines according to confirmed PO
requirements. Offering photoes to show production process.
After finish production, offer photoes to customer to confirm again
with the machine. Then do own factory calibration or third party
calibration(as customer requirements). Check and test all the
details and then arrange packing.
Deliver the products in confirmed shipping time and inform
customer.
5)Installation and after sale service:
Defines installing those products in the field and providing
after-sales support.
