LIYI Perfect Sealing Temperature And Humidity Chamber Controlled
Humidity Chamber
Water Cooled Walk-in Constant Temperature and Humidity Test Chamber
Controlled Humidity Chamber Perfect Sealing is suitable for the
whole machine or large parts of low temperature, high temperature,
high and low temperature change, constant time heat, high and low
temperature alternating moisture and heat test...
The size and function of the studio can be customized according to
user requirements. Pieced box body, beautiful and generous shape;
Scientific airway design can meet the needs of different customers.
Features:
1. The chamber is assembled with self-made storeroom boards. The
dimension and shape of it can be changed freely. It is assembled on
site and can be transported, carries and relocated conveniently.
The special silicon rubber imported from Japan is utilized as the
base material for sealing and contracting for the assemble seams.
The self-made storeroom boards employ the design and processing
technology of frame structure, setting steel plates into the frame
as inner part and outer covering and foaming into a whole body that
boasts the distinctive features of high tightness, perfect sealing,
wide range of temperature and humidity resisting, good warmness
reserving and long life etc. of the industry.
2. Non-frosting operation and automatic defrosting loop, continuous
operation in low humidity and temperature.
3. The 7〃large color control screen comprehensively displays the
operating states.
4. The precooling and preheating temperature are set automatically
based on reset time. The operating state of the chamber can be
adjusted to its best, which can save up to 50% of energy compared
with the old model.
5. It is characterized by low error, high wind speed and uniform
exposure of samples.
6. With the low noise design, the level of noise is controlled
under 72db.
Specifications:
| 1.1 Temperature range | -70 to +180℃
|
| 1.2 Temp Deviation | ≦ ± 2.0℃
|
| 1.3 Temp Fluctuation | ±0.5℃
|
| 1.4 Temp Uniformity | ±2.0℃
|
| 1.5 Heating up& cooling down rate | Heating up rate: RT ↑ +110℃ about 30min (no-load)
Cooling rate: +110℃ down to RT about 60min (no-load, ) |
| 2Humidity | | 2.Humidity control range | 10%R.H～98%R.H | | Humidity deviation | ±3.0％RH(＞75％RH) ±5.0％RH(≤75％RH) | | Humidity uniformity | ±3.0％RH(No load) | | Humidity fluctuation | ±2.0％RH |
Temperature and humidity performance test is in accordance with the
relevant provisions of the
IEC60068 -3 standard measurement; sensor placed in the unit outlet. |
| Workspace volume: W 1500 × H 1500 ×D 1500 mm
Exterior size: W 2110×H 1940×D 2550 mm (about) |
| Single door, left open. Heating wire was installed at the door
frames to prevent condensation at low temperatures. |
| 4．Observation window | With observation window(according to design), multi-hollow electric
insulation coated glass prevent condensation effectively |
| 5．Lighting device | LED Lighting device *1 located on observation window |
| 6. Heating | High quality nickel-chromium alloy wire electric heaters, Non-contact control mode(SSR) |
| 7. Humidifier | Water basin heating and humidification method;
Stainless steel sheathed heater;
Heater control: no-contact control (SSR);
Water level control device, heater anti-dry device. |
| 8. Water outlet hole | Available for drain the condensate water
|
| 9. Cable port | Φ50mm*1 located on each side of chamber, with rubber
stopper and stainless steel cover |
| 10. Shelf for samples | No |
| 11. Mobile Casters | Mobile Casters with foot cups |
- Electronic control cabinet
| Total power circuit breakers, over-temperature protectors |
| Pump to enhance automatic water supply |
| ≧1000kg |
Standards:
● GB-2423．1-2008(IEC68-2-2) Test B: High Temperature Test
● GB-2423．1-2008(IEC68-2-2) Test B: Low Temperature Test
● GJB360．8-2009(MIL-STD．202F) High Temperature Operating Life Test
● GBJl50．3-2009(MIL-STD-810D) High Temperature Test
● GBJl50．4-2009(MIL-STD-810D) High Temperature Test
Flexibility for structure
The panels used in our chamber are 4” (100mm or 150mm) Thick
urethane-foam sandwiched between a stainless-steel interior wall
and a coated-steel exterior. An assembled box is self-supporting.
So that no heavy structural members are required. Different door
sizes, flooring upgrades,access ports, and other modifications are
possible.
Related products:
Temperature Humidity Test Chamber Series:
80L, 150L, 225L, 408L, 800L, 1000L, 1500L, and etc. any size can be
customized.
Walk in Chamber / Walk in Climatic Test Chamber / Walk in
Temperature and Humidity Test Chamber / Aging Chamber series:
8CBM, 10CBM, 12CBM, 24CBM, 27CBM, 45CBM, 256CBM, 300CBM, 485CBM,
520CBM and etc. Can customize.
