Electric Car Stator Conductor Argon Arc TIG Welding Machine
https://youtu.be/55ad3B7YIdI
(1) Application:
Integrated Starter Generator assembly for 2 layers, 4 layer, 6
layers conductor end joint
(2)TIG Welding machine Advantages:
Comparing resistance welding, below are the reason why TIG welding
are widely used in Hybrid car stator
1. The three conductor is not easy to clamp if use resistance
welding
2. TIG welding is a kind of melting welding which have stronger
connection of copper wire and copper wire,
3. Welding contacting resistance of TIG welding is smaller than
resistance welding
4. All the three conductor's position are towards up in same way,
it is easy to use TIG welding method,
Related pure electrical car also use TIG welding method
(3) TIG Welding machine Q&A:
What is the purpose of below marked unit?
This unit in TIG welding machine is used to isolate the second
layer conductor wire,
during first layer conductor wire welding, machine will not weld
the second layer wire,
and this function is applied to 4 layer, 6 layers conductor joint,
not applied in 2 layers stator
(4) TIG Welding fusing machine Parameter:
Welding joint can be set, the starting joint can be set, and stand
alone for welding amending can be set
Power Supply: 220V or 380V,50Hz
Welding spindle,Indexing spindle, Feeding shaft and Lifing shaft
with Mitsubishi servo motor
PLC: Mitsubish 5U series
Touch screen: WEINVEIW
Cylinder: Airtac
Pressure:>0.5MPa
Weight: around 600KGS
Dimenstion:800*800*1500mm
Please click below photo to view video
