KL-MTEX Single cartridge seal replace Burgamann MTEX metal bellow
mechanical pump seal
Features:
Double cartridge seal,metal bellow seal
Balanced
Independent of direction of rotation
Stationary Springs
Pumping device independent of direction of rotation
Operating range:
Temperature:-40℃～220℃
Speed:≤10m/s
Pressure:≤2.5Mpa
Shaft diameter: 25-80 mm
Material:
Rotary face:Carbon/Sic/TC
Stat Ring:Sic/TC
Recommended applications:
Pumps
Process industry
Chemical industry
Hot media
Cold media
Highly viscous media
Special rotating equipment
Product Drawing:
| Size/Metric | D1 | D2 | D3 | L1 | L2 | L3 | L4 | L5 | L6 | L7 | D5 | N | M | G |
| min | max |
| 25 | 25 | 45.0 | 47.0 | 51.0 | 79.5 | 26.1 | 53.4 | 25.4 | 87.0 | 33.6 | 53.4 | 105.0 | 62.0 | 13.2 | 1/4 |
| 30 | 30 | 49.4 | 52.0 | 56.0 | 78.4 | 25.0 | 53.4 | 25.4 | 86.5 | 33.1 | 53.4 | 105.0 | 67.0 | 13.2 | 1/4 |
| 32 | 32 | 52.3 | 54.5 | 57.0 | 78.4 | 25.0 | 53.4 | 25.4 | 86.5 | 33.1 | 53.4 | 108.0 | 70.0 | 13.2 | 1/4 |
| 33 | 33 | 52.3 | 54.5 | 57.0 | 78.4 | 25.0 | 53.4 | 25.4 | 86.5 | 33.1 | 53.4 | 108.0 | 70.0 | 13.2 | 1/4 |
| 35 | 35 | 54.8 | 58.0 | 61.5 | 78.4 | 25.0 | 53.4 | 25.4 | 86.5 | 33.1 | 53.4 | 113.0 | 72.0 | 13.2 | 1/4 |
| 38 | 38 | 57.5 | 60.0 | 66.0 | 78.4 | 25.0 | 53.4 | 25.4 | 86.5 | 33.1 | 53.4 | 123.0 | 75.0 | 14.0 | 1/4 |
| 40 | 40 | 58.8 | 62.0 | 68.0 | 78.2 | 24.8 | 53.4 | 25.4 | 86.3 | 32.9 | 53.4 | 123.0 | 77.0 | 14.2 | 3/8 |
| 43 | 43 | 61.9 | 64.5 | 70.5 | 78.4 | 25.0 | 53.4 | 25.4 | 86.5 | 33.1 | 53.4 | 133.0 | 80.0 | 14.2 | 3/8 |
| 45 | 45 | 65.0 | 68.5 | 73.0 | 78.4 | 25.0 | 53.4 | 25.4 | 86.5 | 33.1 | 53.4 | 138.0 | 82.0 | 14.2 | 3/8 |
| 48 | 48 | 68.4 | 71.0 | 75.0 | 78.7 | 25.3 | 53.4 | 25.4 | 86.8 | 33.4 | 53.4 | 138.0 | 85.0 | 14.2 | 3/8 |
| 50 | 50 | 70.0 | 73.0 | 78.0 | 79.1 | 25.7 | 53.4 | 25.4 | 87.2 | 33.8 | 53.4 | 148.0 | 87.0 | 14.2 | 3/8 |
| 53 | 53 | 71.9 | 75.0 | 87.0 | 77.8 | 24.4 | 53.4 | 25.4 | 87.4 | 34.0 | 53.4 | 148.0 | 97.0 | 18.0 | 3/8 |
| 55 | 55 | 74.6 | 77.0 | 83.0 | 78.9 | 25.5 | 53.4 | 25.4 | 87.0 | 33.6 | 53.4 | 148.0 | 92.0 | 18.0 | 3/8 |
| 60 | 60 | 83.9 | 87.0 | 91.0 | 80.1 | 26.7 | 53.4 | 25.4 | 88.2 | 34.8 | 53.4 | 157.0 | 102.0 | 18.0 | 3/8 |
| 65 | 65 | 87.5 | 90.0 | 98.5 | 80.0 | 26.6 | 53.4 | 25.4 | 88.1 | 34.7 | 53.4 | 163.0 | 109.3 | 18.0 | 3/8 |
| 70 | 70 | 93.0 | 98.0 | 108.0 | 81.5 | 28.1 | 53.4 | 25.4 | 89.6 | 36.2 | 53.4 | 178.0 | 118.3 | 18.0 | 3/8 |
| 75 | 75 | 96.8 | 101.6 | 118.0 | 94.4 | 30.5 | 63.9 | 28.0 | 107.4 | 43.5 | 63.9 | 190.0 | 129.0 | 18.0 | 3/8 |
| 80 | 80 | 104.7 | 108.0 | 124.0 | 94.4 | 30.4 | 64.0 | 28.0 | 106.8 | 42.9 | 63.9 | 195.0 | 135.0 | 18.0 | 3/8 |
Workplant:
Fixing and Applying Directions of Mechanical Seals
1) Select Appropriate mechanical seal to match the materials
according to work conditions and host machine equipment.
2) The radial acting deviation for the shaft(shaft sleeve) of the
installed mechanical seal shall be 0.04mm by maximum
while the axial movement value of the rotor shall be no more than
0.1mm.
3) The seal cover (or shaft cover) of the stationary ring of the
installed mechanical seals,the vertical degree of the seal
face should be 0.04mm by maximum.
4) When installing the mechanical seals,the shaft(shaft
sleeve),seal chamber,seal face as well as the mechanical seal
must be cleaned in order to keep from any medium to sealing part.
5) When conveying medium of over high or low temperature,with
medium which are easy catch fire,easy for explosion.
Related mechanical seal standards must be referred to take
appropriate measures such as quench,rinsing,coolong and
filtrating.
6) Appropricate lubrication must be choosen when mechanical seal is
installed.The installment size of the mechanical
seal must be guaranteed to the installment instruction.
7) Before the machine starts running,the hermetic compartment shall
be full of medium and well lubricated.Dry friction
which may lead to the damage of the air-tightness is strict
forbidden.
Delivery:
1. If the products we have in store, we will send it out ASAP after
receiving payment.
2. If the products which were customized, we will complete the
production within a specified period of time, and send it out the
first time.
3. Also we can send by your delivery acount if you want.
4. We have a variety of ways to send goods, usually DHL, Fedex,
TNT, UPS will be normal ways. If you require use of a courier,
please inform us in advance.
What product we supply?
We design and manufacturer mechanical seals,supplying consulting of
sealing problem and repair service.
Spring pusher seals,Rubber bellow mechanical seals,PTFE bellow
mechanical seal,Metal Bellow Seals,Cartridge Seals,Mixer & Agitator
seals, Dry Gas Seals; Spare parts with material silicon carbide,
Tungsten carbide, Carbon ,Ceramic,rubber,O-rings and stainless
steel parts...
