High Rating ISO20653 IPx9K Ingress Protection Tester for Automotive
and Electronics
Standard of IPX9K Environmental Testing Machine
● IEC60529
● GB4208
● DIN40050-9
● IS020659
● EN 60529
● DIN 40050-9
Description of IPX9K Environmental Testing Machine
High Rating ISO20653 IPx9K Ingress Protection Tester for Automotive
and Electronics in IEC 60529 and ISO 20653, IP x9K is the highest
rating currently available for water ingress protection. Although
IP x9K testing was originally developed for automotive products, it
has become widely used in the electronics, military and consumer
product industries.
IPx9K uses high-pressure steam cleaning and pressure washing to
evaluate how electronic components and product casings protect
against fluids and foreign objects. A combination of heat, water
ingress and chemical detergents are used to measure the effect of
degradation on seals, connectors, wires and mounting equipment
Main Technical Parameter of IPX9K Environmental Testing Machine
Model | R9K-1200 |
| Name | High Rating ISO20653 IPx9K Ingress Protection Tester for Automotive
and Electronics |
Internal dimensions (mm) | 1000*1200*1000 D*W*H |
Overall dimensions (mm) | 1250* 1700* 2050 D*W*H |
Water Spray Temperature | ambient ~ 88℃ (Adjustable) |
Water Spray Angle | 0°,30°,60°,90° |
Spray Nozzle | Four, 30 seconds each position |
Spray Range | 30° ± 5°(Single hole); Space 100-150mm |
Distance from water spraying to specimens | 10~15cm |
Water Pressure | 8000-10000 Kpa (adjustabl) |
Water Flow Rate | 14L-16L/min |
Testing Platform Speed | 5 ±1 r.p.m |
Test Platform height | 200-450mm, adjustable |
Test Platform diameters | 600mm |
Load | ≤100kg |
Controller | Programmable color LCD touch screen controller |
| PC Link with software, RS-232 interface |
Pressure meter Alarm function | Power protection, timing (to be automatic stop), water protection,
motor overheating protection, water temperature overheating
automatic drainage, water function |
Temperature Sensor | PTR Platinum Resistance PT100Ω/MV A-class |
Heater | Nichrome heater |
Interior material | SUS304 stainless steel |
Exterior material | Steel Plate with protective coating |
Power Supply | 380V 50HZ, Three-phase five-wire |
Operating environment | Grading, no corrosive gas, avoid direct sunlight ; Temperature:
+5~+35 C; Humidity: 45～85％RH |
IP9K Level of IPX9K Environmental Testing Machine
● IPx9K Level 1: Standard Testing
The least severe method, standard testing is a water-only test
where 100% of the product's surface must be exposed for at least 3
seconds.
Temperature:Ambient water temperature
TestChamber Pressure:150 gallons/hour
● IPx9K Level 2: Standard Testing with Detergent
Level 2 of IPx9K has the same requirements as standard testing;
however, a cleaning detergent is added, and the temperature is
increased.
Temperature:40 C (104 F)
TestChamber PressureE:150 gallons/hour
● IPx9K Level 3: Harsh Test
The harsh classification of IPx9K Level 3 requires heated, high
pressure water with 100% product exposure for at least 3 seconds on
each side.
Temperature:80 C (176 F)
TestChamber Pressure:230 gallons/hour
Design and Construction of IPX9K Environmental Testing Machine
 |
Test Area
Test area is made of stainless-steel.
Enclosure to be tested is placed on turntable.
Spraying holes: 4 holes in different angle.
Spraying hole with angle of 0°, 30°, 60°, 90°.
Distance from water spraying to specimens: 10~15cm
8000-10000kpa water pressure range |
Large Viewing Window
Interior lighting
Window coated with conducting film to protect it from frost.
Size is 450*550mm W*H
|
 |
Castor
Install 4 castors for ease moving, and with brakes function. Caster
height adjustable.
| Spray Nozzles
There are four nozzles, and the samples can be placed at four
angles (0 °, 30 °, 60 °, 90 °) for high temperature and high
pressure water jetting test. |
Waterproof Rating
IPX-1 | Protected against falling water Equivalent to 3-5mm rainfall per
minute for a duration of 10 minutes.Unit is placed in its normal
operating position. |
IPX-2 | Protected against falling water when tilted up to 15 degrees - Same
as IPX-1 but unit is tested in 4 fixed positions -tilted 15 degrees
in each direction from normal operating position |
IPX-3 | Protected against spraying water - Water spraying up to 60 degrees
from vertical at 10 liters/min at a pressure of 80-100kN/m2 for 5
min. |
IPX-4 | Protected against splashing water - Same as IPX-3 but water is
sprayed at all angles. |
IPX-5 | Protected against water jets - Water projected at all angles
through a 6.3mm nozzle at a flow rate of 12.5 liters/min at a
pressure of 30kN/m2 for 3 minutes from a distance of 2.5 meters. |
IPX-6 | Protected against heavy seas - Water projected at all angles
through a 12.5mm nozzle at a flow rate of 100 liters/min ata
pressure of 100kN/m2 for 3 minutes from a distance of 2.5 meters. |
IPX-7 | Protected against water immersion - Immersion for 30 minutes at a
depth of 1 meter. |
IPX-8 | Protected against water submersion - The equipment is suitable for
continual submersion in water under conditions which are identified
by the manufacturer. |
IPX9K | Adopts high pressure pump, spraying style heating device,4 Spray
Nozzle,30S each position. |
Our Service
36 months Warranty, Lifelong Follow-up Services
We have a professional after-sales team, if you have any questions
during operation, we will supply solutions to you with 24 hours.
Warranty condition:
(1). Our company will repair the product, if the product, the
material of the parts, the design and manufacturing of the products
raised hardware problems caused by product itself rather than human
error within three years warranty period since the date of
dispatching by the customer.
(2). Our company repairs the products, but will collect the basic
costs of the spare parts after the warranty period, but service is
free always.
How to Service?
1, At first, our test chambers are produced based on 20 years
product lifetime. So will not easy to break down. Normally once
test chambers have problems, we judge the problems, and send spare
parts to our customers, and teach them how to change new parts on
by email or video. Within 3 years, all spare parts and shipping
cost (by DHL, TNT, and FedEx) paid by LIB.
2, If customer need to send our engineers to customers' work place,
the customer company only need pay the ticket accommodation to our
Engineers, service is for free.
3, If Products still can't use after our engineers repair, we will
produce a new test chamber (same as the old one) to our customers
with no charge.
Other Pruducts
More products welcome to consult!
Our main products included temperature and climate test chambers,
corrosion chambers, weathering testers, IP dust and rain chambers,
ozone test chamber, noxious gas SO2 H2S chamber, walk-in chambers.
| Industrial Drying Oven | Walk In Environmental Chamber |
| Benchtop Environmental Chamber | Water Spray Test Chamber |
| Constant Humidity Chamber | Xenon Test Chamber |
Are you ready to buy a machine to make your product more reliable?
