Product Usage
Suitable for sewage treatment production line.
The core components of the commutation are made of special
superconducting materials, the control part adopts intelligent time
control, the power is turned off during switching, and it has
protection functions such as undervoltage, phase loss, overcurrent
and short circuit.
According to customer needs, it can expand standard control
interfaces such as 4-20mA, 0-10V, 0-5V, etc. It can also meet the
requirements of RS485 communication interface with the host
computer, RS232 and other control systems.
Technical Parameters
Input voltage: three-phase AC380V±15%
Output current: 500-40000A optional
Output voltage: 12V 18V 36V optional
Output current: 0-limit current value (steplessly adjustable)
Output voltage: 0-limit voltage value (steplessly adjustable)
Control mode: PMW pulse width control
Cooling method: forced air cooling
Control accuracy: rated value ≤1%
Operation mode: operation under different states of voltage
stabilization/steady current
Specification
| SPECIFICATIONS FOR GKD15-5000CVC |
| Input AC | 380V±10% | 3phase | 50/60Hz |
| Output DC | Volt | 0~500V Adjustable |
| Current | 0~40A Adjustable |
| Power | 20KW |
| Efficiency | >85% |
| output Frequency | 40KHz fixed |
| reverse | reverse time | 0~999hours optional |
| reverse way | mannual/automatic |
| Protection | Short circuit protection
Overheating protection
Phase lack protection
Input over/low voltage protection |
Working Condition
(Temperature) | -10℃~50℃ | Control mode | Panel control
Remote control |
| Net weight | 280kg | Working mode | Constant Voltage(CV)
Constant Current(CC) |
| Dimension(mm) | 1020*1000*1270m | Cooling way | water cooling |
Features
Using timing control function, the setting is simple and
convenient, and the working time of positive and negative current
polarity can be arbitrarily set according to the plating process
requirements.
It has three working states of automatic cycle commutation,
positive and negative, and reverse, and can automatically change
the polarity of the output current.
How to install rectifier
This is installation way for remote control rectifier. Not only
this way.
1. To connect copper bar with bath/tank
2. To ensure power supply/rectifier is grounded
3. To ensure there is enough water for water cooling type power
supply/rectifier
4. We advice that all rectifiers should be isolated to increase of
its life.
Other advantages
1. Cabinet
a: Adopting completely digitalized machining
b: Adopting cold rolled production of iron steel sheet, after phosphorization, zinc plating, plastic spray, the rectifier gets better structural
strength and anti-corrosion.
c: Reasonable structure design, isolated inverter design,
rectification part is convenient to disassemble and mend because of
its neat assembling.
d: Radiator gets better cooling effect because of its 1.5 times capacity.
2 Electric control system
a: The rectifier adopts full bridge phase-shifted soft switch
control, ensuring the lowest power loss of IGBT. The capacity of
IGBT become 3 times bigger.
b: The main transformer. It adopts amorphous core to increase transformer efficiency and cool transformer, and not only can lighten rectifier weight,
but also can strengthen rectifier stability and reliability. At its
elementary stage, it adopts series blocking capacitor.
c: Magnetic deviation automatic correction circuit is adopted and
the total power of magnetic core gets enlarged 1.5 times.
3 Schottky Barrier Diode
a: It has been expanded 4 times.
4 All the controlling boards get antiseptic treatment with imported
lacquer.
