Spot Welding Plain Steel Wire Mesh Cloth Disc For Solid / Gas Separation Muffler

Spot Welding Plain Steel Wire Mesh Cloth Disc / Welded Extruder Screen filter screen disc

Material: Stainless steel, phosphor-bronze, nickel, low carbon steel, copper, brass
Wire Diameter: 0.017-2.03mm
Weave Style: Plain weave, Twilled weave, Dutch weave
Roll width: 0.9144m,1.05m,1.22m,1.524m,1.83m (3', 3.5', 4', 5', 6')
Length: 30.5m or as requested
Sample: Available
Mesh size: 1x1-635x635mesh/inch
Certificate: ISO9001-2008

Packing:

Each package wrapped by plastic paper, then put into the standard export box or wooden case

Application of Plain Steel WIre mesh

1) Solid/gas separation Muffler, silencer Air purification
2) Filtering oil dedusting, Isolation dust, dustproof
3) Moistureproof Heat insulation ,
4) Uniform gas,well-distributed, diffuse gas or oil or heat
5) Breathable protection ,Pharmaceutical , medicine
6) Chemical ,Chemical fiber
7) Filtration for high temperature environment
8) High pressure reverse wash filtering

Production process for plain steel wire mesh
1. Raw material checking - Test wire diameter, wire mechanical property and chemical composition.
2. Wire Warping - Roll the wires all over the bobbin creel which is part of weaving machine.
3. Mesh Weaving - Get the weaving machine started to work
4. Quality Inspecting: Check if mesh surface and specification conform to the custmer requirements.
5. Epoxy Coating: Take electrostatic powder coating
6. Quality rechecking: Check if the situation of hole blockage exist
7. Edge Cutting: Cut the extra edge off
8. Packing - Put the mesh roll to the certain package and then store in the finished product warehouse.

We finished above mentioned products using our own equipment facility, so on basis of competitive cost, quality can be under good control without any rough-handling which is always existed in the outside processing plant.

If you have any inquiry for the plain steel wire mesh, please feel free to ask.

Boer was founded in 1992, has 25 years of history. Our company covers an area of 56000m2 plant area is 36000m2.

The main products: polyester printing screen, metal wire mesh filtration, polyester and nylon filtration. The sales value reach 18 million USD in 2019 and all products are exported to Germany, USA, Japan, Europe, America , Southeast Asian and so on.

The polyester and nylon filtration wire mesh. Our company own 39 P7100-S390 projectile looms from Switzerland.The production range 20 mesh to 420 mesh.Annual output reach 1.8 million square meters. They are widely used in liquid and solid filtration for food, pharmaceutical, chemical and so on.

The metal wire mesh filtration: stainless steel wire mesh, low carbon wire mesh and all kinds of discs and cylinders.The specification of our productions is from 1 mesh to 500 mesh. Annual output is up to 7 million square meters wire cloth and 8 million wire cloth discs.They are widely used in filtration for the auto, plastic rubber, textile, chemical, oil etc.

At present, our products have been exported to Europe,America,Southeast Asia etc.more than 30 countries and areas. Our sales value reach 23million in 2019.