TY90 Cummins Engine Max Pull 100kN Hydraulic Cable Pulling Machine

Characteristics

• Bull-wheel diameter: 540mm
• Groove number: 8
• Max rope diameter : 21mm
• Max diameter of rope reel: 1400mm
• Total weight: 4350kg
• Overall dimension (length*width*height): 4500×2100×2450mm

Performance

• Max pull: 100kN
• Max continuous pull: 90kN
• Speed at max pull: 2.5km/h
• Max speed: 5km/h
• Pull at max speed: 40kN

Main configuration

• Engine: Cummins
• hydraulic pump: German Rexroth
• Main motor: German Rexroth
• speed reducer: German Rexroth
• Tail bracket hoisting motor: American Eton
• Hydraulic meter: German
• Operating handle: German Rexroth

Engine

• Diesel 118kw(158hp) Euro II, 4-stroke cycle, turbo-charged
• Cooling system liquid
• Electrical system 24V

Hydraulic Transmission

• Closed hydraulic circuit for step less speed variation in both rotating directions. This machine is provided with a pull pro-setting system that maintains the pre-set pulling value (also when the speed is reduced to "0") by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.

Configuration

• Hydraulic dynamometer with set-point and automatic control of maximum pull
• Hydraulic oil cooling system
• Control instruments for hydraulic system and diesel engine
• On board reel winder with automatic level wind, suitable for standard reel mod. 1100 and 1400
• Hydraulic front stabilizer
• Grounding connection point

Additional Devices

• Lighting system for the trailer
• Hydraulic rope clamp for reel change
• Swivel guide rope roller
• Trailer for towing at max speed of 30 km/h
• Extra shaft
• Digital speed and meter counter (extra charge)

Additional Devices

• The chassis provided with Brake, back lights and mudguard, with a single point lift to allow lifting with a crane.
• Cable and radio remote control fully replacing all controls at machine panel.
• Remote diagnosis via GSM network with GPS modem, Synchronization system
• Hydraulic system for drum stand control with flat face quick action couplings
• Auxiliary Hydraulic system (700/1000 bar) for power pressing tool
• Lockable toolbox, Holding fixture for hose kit, Grounding plate, Acoustic insulation
• Biodegradable hydraulic oil, Allowable tension indictor, Overload tension alarm, First Aid Kit
• Manufacturer's workshop maintenance manual, in English
• Manufacturer's recommended tools.
• Manufacturer's routine spares for five years' duty (filters, bulbs, etc.).