Sanitary Mechanical Homogenizer Machine For Pharmaceutical , Fine
Chemicals
Mechanical Homogenizer Feature:
This machine are features with good design,convenient operation and
simple maintenance,and safety.
1) Low noise:Noise of transmission is lower than noise of motor.
The pointer of pressure meter is steady, and also the range of
swing of pointer is less than 2M Pa.
2) Smashing granularity is between 0.1 micron to 0.2 micron, and
their average size≤1 micron.
3) Sealing material can work under less than 150ºC, and the parts
touching material is made of stainless steel which can stay up to
the acid and alkali. All of valves and plungers are made of special
material, so they are durable and inexpensive. The bearing is also
durable because it is made of special alloy material, which is the
more friction, the more hardness.
4) Lubrication of homogenizers is credible, and it only need
changing oil the first time when work 800 hours to 1000 hours,
since then it need to be changed oil per year later
5) The higher the pressure the finer the material the more uniform
particle size, 30MPA the following models, mainly for liquid -
liquid emulsification. Pressure of 30MPA above, on the liquid -
solid dispersion of liquid into play when the pressure most of the
material up to 60MPA reach 2μm particle size less than when the
material reaches 80MPA more obvious when the role is mainly used
for ultrafine particles broken Materials to achieve the following
general 1μm. As to 100MPA above, can be produced more subtle
particles, some of the material particles after repeated high
pressure homogenization, 0.1-0.5μm can be prepared the following
no-grain materials.
Mechanical Homogenizer Main technical parameters:
Model | SRH6000-30 |
Rated flow: L/H | 6000 |
Max pressure: Mpa | 30 |
Normal working pressure: Mpa | 0-24 |
Inlet pressure: Mpa | 0.2-0.3 |
Adaptable material feeding temperature / viscosity | 100℃/≤1000CP |
Rated motor power: KW | 55 |
Size: cm | 180*120*130 |
Weight: KG | 3000 |
Lubricating oil | L-HM100 OR Mobil SHC627(ISO VG100) |
Housing Material | Stainless steel |
Plunge Sealing Material | packing |
Pressure gauge | Diaphragm |
Support material | shaped steel |
Mechanical Homogenizer Applications:
1.Chemical
Disinfectants, emulsifiers, fuel oil, insecticides, oants, oil
emulsions, silicone emulsions, wax emulsions, lubricants,
resins/rosins, latex, viscosity Improvers.
2.Pharmaceutical
Antibiotics, skin cream, intravenous, emulsion, ointments, tablet
coatings, lipostiomes
3.Cosmetics
Hair products, skin creams, lotions, perfumes, shampoos and
conditioners.
Types of Homogenizer:
1.Manual Operating Homogenizer
Two- stage homogenizer system with manual pressure adjustment is
easy to use. It is your economic choice.
2.Hydraulic Operating Homogenizer
The hydraulic control system is developed to adjust the homogenizer
pressure, and it is easy to upgrade to remote control system by
changing to Proportional valves.
3.Pneumatic Operating Homogenizer
The pneumatic control system is developed for the homogenizer, and
it is easy to upgrade to remote control.
4.Large Capacity Homogenizer
This machine has five plungers with the maximum flow reaching
30000L/H. The hydraulic end adopts the split structure which
facilitates assembly and disassembly. The pressure adjustment can
adopt manual or hydraulic mode.
5.Laboratory Homogenizer
Capacity: 60L/H Max Pressure</=70MPa
Minimum Sample Volume: 200ml
