Auto Non Woven Face Mask Making Machine With Aluminum Alloy
Structure
Non Woven Face Mask Making Machine Introduction
This Non Woven Face Mask Making Machine is a fully automatic
one-to-two mask machine, one body machine drives two ear band
machines. After the main body machine outputs the mask body, the
mask body sheet is conveyed to the turning mechanism by a conveyor
belt structure. The reversing mechanism is used to flip the mask
plate onto the belt connected to the ear band machine, and then the
mask sheet is conveyed to the first mask plate on the front of the
ear band machine through the conveyor belt, and finally the mask
sheet is placed on the ear band by the cylinder pressing In the
mask plate of the machine, the ear band machine is used to complete
the welding of the ear bands of the mask and the edging, thereby
completing the production of an ear band mask product. This machine
adopts PLC, touch screen control, single-phase motor for main
conveyor belt, stepping motor turning, precise transmission, stable
control and adjustable speed.
Non Woven Face Mask Making Machine advantages:
1 full automatic output, mask ontology has ears machine to
automatically, reduce the labor costs, reduce interference May
2. The ear band machine does not need to wait for work, and the
adaptive interactive processing system can comprehensively improve
the productivity
3. Built-in anti-deformation and anti-displacement device, to
ensure stability and reliability, all-weather 100% qualified input
4. Preset quantitative integrated output, neatly stacked, never
scattered, hygienic and reliable
5. From the production mask ontology to meet bridge of the nose,
ears with soluble ears with spot welding, fully automated, a
molding, do not need any artificial operation:
6. The size of the nose bridge strip and the size of the body can
be configured according to the drawings provided by the customer.
7. Face mask folding can be adjusted according to their own needs
8. The machine adopts computer programmed control and photoelectric
detection, which improves the stability of the machine and reduces
the failure rate of the machine
9. The machine adopts frequency conversion control to accurately
control the production efficiency and production speed. Users can
also adjust the production speed according to their own actual
situation.
10. Compared with semi-automatic equipment, this set of equipment
has higher efficiency, humanized design and convenient operation,
which solves the problems of low working efficiency, difficult
recruitment and high wages of workers in mask manufacturing
enterprises.
11. From the production of the mask itself to the welding of the
bridge of the nose and the spot welding of the ear strap, the
product packaging is completely automated and can be completed in
one time without any manual work
12. The size and length of the nose bar can be configured according
to customer requirements;
13. Feeding system: the machine adopts aluminum alloy structure,
beautiful and strong, automatic feeding system, setting of
tensioning degree, adjusting the tensioning degree of the cloth,
thus effectively ensuring the beauty and flatness of the finished
product;
14. The folding position of the mask can be adjusted freely
according to requirements, with accurate positioning and no
displacement
Welding principle: by means of air compressor to provide air power into the cylinder
for a linear reciprocating motion of gas and raising the pressure
in compressor cylinder piston compression air supply from one side
of the piston can produce pressure, air pressure forces the pistons
to generate thrust, through the titanium alloy welding head with
two ultrasonic welding head surface rubbing against each other
(high frequency vibration of tens of thousands of times per second)
to form a fusion between the molecular layer
