11-35kV Composite windproof deviation insulator sub-unit pole
accessories
Installation:
1. The windproof and partial composite insulators should be handled
gently during transportation and installation to avoid collision
and friction with miscellaneous pieces and sharp objects.
2. When lifting, the knot should be hit on the end attachment. It
is strictly forbidden to hit the umbrella skirt or sheath. When the
rope must touch the umbrella skirt and the sheath part, it should
be wrapped with soft cloth in the contact part;
3. The windproof partial composite insulator should not be used as
an auxiliary tool for the discharge (receiving) line, so as not to
damage the insulator due to impact or bending moment;
4. It is strictly forbidden to step on the insulator umbrella
skirt;
5. When installing the equalizing ring, make the ring perpendicular
to the axis of the insulator. For the open type equalizing ring,
pay attention to the same direction of opening at both ends to
facilitate discharge and protect the umbrella skirt;
Pin Insulator is special for badly polluted areas, high mechanical
tension load, long span and compact power line.They have feature of
light weight, small volume, unbreakable, anti-bend, high strength
for anti-twist and strong explosion protection.
Components:
Core rod: made of FRP rod or ECR rod
Sheds: made from high quality HTV silicone rubber, through high
pressure injection moulding techniques to create a smooth surface
End fittings: various pin end fittings made of hot dip galvanized
cast steel
Properties & Advantages(the reason to buy!):
1. superior bending and tensile strength
2. electric corrosion resistance
3. excellent corona resistance
4. high pollution resistance
5. superior hydrophobicity/anti-water performance
6. aging resistance
7. anti-leakage trace
8. anti-ipulse property
9. shaking-proof
10. Good brittleness-proof property
11. light weight, convenient installation.
Main Technical Parameters (Performance meet the GB/T
20142-2006,IEC61952):
| Model | Rated Voltage (kV) | Rated Mechanical Bending Load (kN) | Structure Height (mm) | Min Arc Distance Li. (mm) | Min Creepage Distance Lc. (mm) | Diameter of Shed (mm) | Lightning Impulse Withstand Voltage Peak (kV) | P.F. 1 Min Wet Withstand Voltage (Virtual Value) (kV) |
| FPQ-11/4 | 11 | 4 | 295 | 140 | 360 | 90/88 | 105 | 105 |
| FPQ-11/5 | 11 | 5 | 280 | 180 | 380 | 90 | 105 | 105 |
| FPQ-11/10 | 11 | 10 | 300 | 165 | 420 | 140/114 | 105 | 105 |
| FPQ-11/12.5 | 11 | 12.5 | 320 | 195 | 450 | 110 | 95 | 95 |
| FPQ-15/10 | 15 | 10 | 280 | 160 | 665 | 130/100 | 145 | 145 |
| FPQ-24/8 | 24 | 8 | 315 | 200 | 450 | 120/100 | 145 | 145 |
| FPQ-24/11 | 24 | 11 | 476 | 165 | 610 | 135/105 | 145 | 145 |
| FPQ-33/8 | 33 | 8 | 425 | 320 | 1150 | 122/92 | 230 | 230 |
| FPQ-33/10 | 33 | 10 | 406 | 280 | 940 | 122/92 | 200 | 200 |
| FPQ-33/12 | 33 | 12 | 545 | 380 | 1485 | 200 | 250 | 250 |
| FPQ-33/12.5 | 33 | 12.5 | 545 | 405 | 1650 | 150/120 | 265 | 265 |
| Model | Rated Voltage (kV) | Rated Mechanical Bending Load (kN) | Structure Height (mm) | Min Arc Distance Li. (mm) | Min Creepage Distance Lc. (mm) | Diameter of Shed (mm) | Lightning Impulse Withstand Voltage Peak (kV) | P.F. 1 Min Wet Withstand Voltage (Virtual Value) (kV) |
| FXBW-11/70-SB | 11 | 70 | 350 | 180 | 420 | 92 | 95 | 45 |
| FXBW-11/100-SB | 11 | 100 | 380 | 185 | 420 | 92 | 95 | 45 |
| FXBW4-11/80-SB | 11 | 80 | 450 | 280 | 550 | 144/114 | 125 | 65 |
| FXB-24/70-EE | 24 | 70 | 425 | 230 | 575 | 98/88 | 125 | 65 |
| FXBW-24/70-SB | 24 | 70 | 440 | 270 | 850 | 130/100 | 125 | 65 |
| FXBW-24/120-SB | 24 | 120 | 545 | 320 | 900 | 115/85 | 145 | 65 |
| FXB-25/70-CT | 25 | 70 | 500 | 330 | 735 | 92 | 145 | 65 |
| FXB-33/70-SB | 33 | 70 | 505 | 330 | 900 | 92 | 200 | 95 |
| FXBW-33/100-SB | 33 | 100 | 570 | 385 | 920 | 115/75 | 200 | 95 |
| FXBW-33/80-SB | 33 | 80 | 720 | 555 | 1650 | 144/114 | 250 | 135 |
| FXBW-35/100-EH | 35 | 100 | 750 | 430 | 1400 | 130/100 | 185 | 95 |
| FXBW-36/120-SB | 36 | 120 | 670 | 430 | 1400 | 130/100 | 185 | 95 |
