Stainless Steel V-Belt Driving Energy Efficiency Centrifugal
Ventilation Fans
Introduction
Stainless Steel V-Belt Driving Energy Efficiency Centrifugal
Ventilation Fans have high pressure coefficient, low peripheral speed, low noise,
flat performance curve and wide area of high efficiency.
Stainless Steel V-Belt Driving Energy Efficiency Centrifugal
Ventilation Fans are used in forging furnaces and high pressure forced ventilation
and are widely used to transport materials and air. The maximum
temperature should not exceed 250 degrees Celsius.
Suitable for flow and dust removal ventilation systems in high
pressure heads.
Ultrasonic flaw detection on the welding seam and main spindle of
the impeller to ensure that there are no welding defects or
material defects and ensure the strength.After running test and
vibration value detection, the operation is reliable.
Technical data
| Centrifugal Fan Series | Centrifugal Fan Model | Rotation Speed
(r/min) | Total Pressure
(Pa) | Air Capacity
(m³/h) | Power
(kW) |
|---|
| 6-03 | 6C | 1800～2400 | 1785～4325 | 2403～6830 | 4～11 |
| 7C | 1500～2020 | 187～4178 | 3180～9129 | 5.5～15 |
| 9C | 1645～1800 | 3354～5482 | 7420～17300 | 22～37 |
Advantages and Features
1. Stainless Steel V-Belt Driving Energy Efficiency Centrifugal
Ventilation Fans can output higher outlet pressure and provide more gas flow at the
same time, low noise. Stable operation at higher media
temperatures.
2. The variable inlet damper can be used to flexibly adjust the
pressure and flow of the fan during operation. The variable
frequency motor can also be selected to adjust the pressure and
flow of the fan by changing the speed.
3. Bearing cooling method: according to gas temperature and
operating environment conditions choose low-cost water-cooling
method or oil-cooling method with good heat dissipation
performance. For extremely high temperature operating conditions,
can also be installed with an electronic cooler, absolute
protection of the reliable operation of the fan system.
4. The material of impeller and main shaft, we will choose
high-strength carbon steel, low-alloy steel, high-temperature alloy
steel, high temperature &high-strength alloy steel for
different working conditions temperature and working speed, so that
the impeller and main shaft at high temperature still maintain
reliable strength.
5. The Centrifugal Ventilation Fan's bearing housing is reserved for the installation position of
temperature and vibration sensors, which can facilitate the
installation of fan operation monitoring device.
