8-12ton per hour Rice Polisher Machine In Series With Double Roller
Detailed Structure:
1. Polishing machine system construction: feed hopper, machine
seat, polishing room, water control system composed of four parts.
2. Feed hopper part: feed hopper part is composed of feed hopper,
feed hopper seat, adjusting door, insert piece, nozzle and so on.
3. Mounting: the seat is mainly composed of a seat, a side door, a
bran bucket and a control housing.4. Polishing chamber: main shaft, inlet water spray mechanism,
screw head, polishing roller (front and rear iron roller), feed end
bearing, outlet end bearing and other parts.
5. Water control system structure:it consists of motor protection
unit, water controller, ammeter, Flowmeter, water storage tank,
self-suction water supply pump, control box and so on.
| Item | Unit | YTDPG160P(NEW) |
| Capacity | Kg/h | 8000-12000 |
| Main Axial Speed | r/min | 750 |
| Polishing Roller | mm | Φ177x1550 |
| Spiral Propeller | mm | Φ190x359(dia*length) |
| Radial Trapped Gas | mm | 12.5 |
| Axial Feed End Trapped Gas | mm | 2 |
| Axial Discharge End Trapped | mm | 10 |
| Weight | kg | 2900 |
| Air Volume | m3/h | 5500 |
| Static Pressure(water column) | mm | 250-300 |
| Power | kw | 55x2(4grade) |
| Overall(LxWxH) | mm | 2610x1410x1815 |
| Note: The above technical data can be changed without notice. |
To learn more about this machine, please visit:
www.riceprocessingplant.com,and our facebook page.
If you have any questions,please feel free to contact us.
