Coal-Fired Boiler Wear Resistant Cement Centrifugal Blower Fan
Introduction
The temperature of the medium is generally not more than 80°C, and
the dust and hard fine particles contained in the medium are not
more than 150mg/m3.
The Coal-Fired Boiler Wear Resistant Cement Centrifugal Blower Fan can also be used in cement kiln decomposition process, steel
smelting and other special occasions use of high temperature fan
(use heat resistant & high strength material).
According to fan parameters you need, SIMO can make centrifugal
blower fan technical solution for you. So please provide air
capacity, pressure range, medium temperature, voltage and other
requirements, more details will help us design suitable technical
solution for you.
Technical data
| series | model | Centrifugal Blower Rotation Speed
(r/min) | Centrifugal Blower Total Pressure
(Pa) | Centrifugal Blower Air Capacity
(m³/h) | Power
(kW) |
9-08 Centrifugal Blower | 7.1C | 2900 | 10635～12427 | 12292～19360 | 75～110 |
| 8C | 1450～2900 | 3249～15955 | 8792～27696 | 18.5～200 |
| 9C | 1450 | 4181～4869 | 12518～19717 | 30～45 |
| 10C | 1450 | 5065～6143 | 17172～30052 | 55～75 |
| 11.2C | 960～1450 | 3031～7747 | 15973～42221 | 30～132 |
| 12.5C | 960～1450 | 3450～9713 | 22206～58695 | 45～250 |
| 14C | 960～1450 | 4341～12285 | 31197～82463 | 75～400 |
| 16C | 960～1450 | 5696～16250 | 46569～123090 | 185～850 |
Advantages and Features
1. The Coal-Fired Boiler Wear Resistant Cement Centrifugal Blower Fan can output higher gas pressure, and can provide more gas flow at
the same time, low noise.
2. In the case of using the common base, the installation is very
simple and basically does not require the support of professional
technicians.
3. The motor shaft is elastically connected with the drive shaft.
It is not necessary to tighten the belt or replace the belt
frequently, and the maintenance workload is small.
4. The fan system running at normal temperature with an impeller
diameter of less than 1400 mm does not require additional
configuration of bearing cooling device, which reduces the user's
investment and maintenance workload.
5. When the airflow resistance is increased, the motor load will be
automatically reduced and the motor will not be burnt.
6.The fan is made of high quality carbon steel, and can also use
stainless steel or other metal materials according to customer
requirements.
FAQ
1. What parameters need to be provided when you design the
industrial centrifugal fans?
Answers: Air flow, total pressure or static pressure, inlet
temperature, local voltage and frequency, Altitude etc.
If there is flammable and explosive gas, or big dust loading in the
medium, please also inform the designer.
2. How about your company’s pre-sales service and after-sales
service?
Answers: Before our cooperation, we have the professional technical
team to help you make the technical solution according to your
working condition, to make sure the centrifugal fan efficiency
operation.
After sales service, we will offer 12 months’ repairing service,
and provide lifelong follow-up services. Besides, our engineers are
available for going abroad to offer the repairing service.
3. Does your company have qualifications?
Answers: SIMO Blower has obtained ISO 9001-2008, CE, BV
certifications and so on.
