Oven Wall Cooling Efficient Energy-Saving Stainless Steel Blower
Introduction
Oven Wall Cooling Efficient Energy-Saving Stainless Steel Blower is suitable for conveying air and non-corrosive, unnatural and
non-viscous gases.
The temperature of the medium is generally not more than 80°C, and
the dust and hard fine particles contained in the medium are not
more than 150mg/m3.
The fan can also be used in cement kiln decomposition process,
steel smelting and other special occasions use of high temperature
fan (use heat resistant & high strength material).
Centrifugal fan is applied in industrial boiler, (centrifugal fan
can be applied in industrial boiler,) it also can be applied in
industrial kilns, blast furnace, Industrial waste heat recovery
device, Electrolytic aluminium production line air purification
system and other industrial work environment.
According to fan parameters you need, SIMO can make centrifugal
blower fan technical solution for you. So please provide air
capacity, pressure range, medium temperature, voltage and other
requirements, more details will help us design suitable technical
solution for you.
Technical data
| series | model | Stainless Steel Blower Rotation Speed
(r/min) | Stainless Steel Blower Total Pressure
(Pa) | Stainless Steel Blower Air Capacity
(m³/h) | Power
(kW) |
9-08 Stainless Steel Blower | 4A | 2900 | 3852～3407 | 2198～3215 | 5.5 |
| 4.5A | 2900 | 4256～4910 | 3130～4792 | 7.5～11 |
| 5A | 2900 | 5180～6035 | 4293～6762 | 15～18.5 |
| 5.6A | 2900 | 3527～7610 | 6032～9500 | 22～30 |
| 6.3A | 2900 | 8310～9698 | 8588～13525 | 45～55 |
Advantages and Features
1. Oven Wall Cooling Efficient Energy-Saving Stainless Steel Blower can output very high pressure and can work at higher medium
temperature, suitable for any industrial occasion where high
pressure & high temperature gas needs to be delivered.
2. In the case of using the common base , the installation is very
simple and basically does not require the support of professional
technicians.
3. The bearing box is reserved with the temperature and vibration
sensor installation position, which can conveniently install the
fan operation monitoring device.
4. When the airflow resistance is increased, the motor load will be
automatically reduced and the motor will not be burnt.
5. Customized design according to customer performance
requirements, and optimized by CFD technology, the energy
consumption is lower than similar models.
6. The parts are closely matched and have good sealing performance
to ensure the output pressure will not be reduced.
FAQ
1. What parameters need to be provided when you design the
industrial centrifugal fans?
Answers: Air flow, total pressure or static pressure, inlet
temperature, local voltage and frequency, Altitude etc.
If there is flammable and explosive gas, or big dust loading in the
medium, please also inform the designer.
2. How about your company’s pre-sales service and after-sales
service?
Answers: Before our cooperation, we have the professional technical
team to help you make the technical solution according to your
working condition, to make sure the centrifugal fan efficiency
operation.
After sales service, we will offer 12 months’ repairing service,
and provide lifelong follow-up services. Besides, our engineers are
available for going abroad to offer the repairing service.
3. Does your company have qualifications?
Answers: SIMO Blower has obtained ISO 9001-2008, CE, BV
certifications and so on.
