Low Noise Beneficiation Plant Flotation Machine, XCF/KYF Series
Flotation Machine Easy Maintenance
Introduction of Flotation Machine
Flotation machine is mainly used for separating copper, zinc, lead, nickel, gold and
other non-ferrous metals, and it can also be used for ferrous
metals and non-metallic rough and refined. Our company mainly
produces three kinds of flotation machine as follows:
Mechanical Agitating Flotation Machine With Auto Air Suction
New structure of impeller is backwards inclined double impellers
equipped with honeycomb duct and dummy bottom. Therefore, the
slurry in the tank will cycle upward and downward in a fixed flow
manner, which is helpful to the suspension of those coarse
particles. Air and slurry are naturally sucked without need for
foam pump.
Mechanical Agitating Aeration Flotation Machine Set
Models XCF and KYF are enforced aeration flotation machine. It has a smaller diameter
of impeller, thus lower peripheral speed, saving 30-50% of power.
Because and air distribut
or is equipped in the tank, air is evenly dispersed. The impeller
acts as a centrifugal pump, so as to make the solid particles
suspending. The tank is mode as u type, reducing sand settlement to
the least .Due to reasonable design of the impeller structure and
the impeller space, impeller wearing is even, so , the service life
of the impeller and stator are extended. Model KYF is unable to
spontaneously suck slurry, while has low power consumption. In
contrast, model XCF has the ability to automatically suck slurry,
and may be allocated horizontally without need for foam pump, but
consumes more power than model KYF. Therefore, model XCF and model
KYF are combined into a set, i.e., XCF as the sucking tank, and KYF
as the direct tank. The combined set can be arranged horizontally
without foam pump either.
Mechanical Agitating Flotation Machine with Auto Air Suction
The BF flotation machine impeller is composed of the closed double frustum, may produce the
strong slurry under to circulate, its characteristic: (1) the
suction intensity is big, the power loss is low.(2)each trough has
the suction, attracts the thick liquid and the flotation process
function, from becomes the flotation process return route, does not
need any supporting facility, the level disposition, is
advantageous for the flow change.(3) the slurry circulation is
reasonable, can maximum limit reduce the coarse sand
precipitation.(4) is equipped with the slurry surface automatic
control and the electrically controlled installment, the adjustment
is convenient.
When the flotation cells machine equipment works
1. The impeller of the flotation cells is driven by the spinning
engine triangle to form the centrifugal formation and produce the
negative pressure.
2. On one hand, large of inhaled air is mixed with the pulp;
3. On the other hand, the stirred pulp is mixed with the drug to
fine the bubble, to make a certain mineral bond on the bubble.
Adjust the height of the disc to control the liquid surface and the
useful bubble will be scraped out.
Advantages:
1. Self-absorption of air.
2. Good cycling property of pulp.
3. Flotation machine's suction volume is relatively stable.
4. Medium mixing strength and good suspension of solid particles.
5. The liquid level of the flotation machine is stable and it has
low power consumption.
SPECIFICATIONS
XCF/KYF Series Flotation Machine
| Model | Volume (m3) | Cell Size (mm) | Impeller Dia. (mm) | Impeller Speed (r/min) | Capacity (m3/min) | Power (kw) |
| XCF/KYF | 1 | 1000x1000x1100 | 400/340 | 358/281 | 0.2-1 | 5.5/4/1.1 |
| XCF/KYF | 2 | 1300x1300x1250 | 470/410 | 331/247 | 0.4-2 | 7.5/5.5/1.1 |
| XCF/KYF | 3 | 1600x1600x1400 | 540/480 | 266/219 | 0.6-3 | 11/7.5/1.5 |
| XCF/KYF | 4 | 1800x1800x1500 | 620/550 | 215/200 | 1.2-4 | 15/11/1.5 |
| XCF/KYF | 6 | 2050x2050x1750 | 620/550 | 215/200 | 3-6 | 15/11/1.5 |
| XCF/KYF | 50 | 4400x4400x3500 | 1200/1030 | 134 | 10-40 | 90/75/1.5 |
| XCF/KYF | 70 | 5100x5100x3800 | 1120/1120 | 121 | 13-50 | 90/90/1.5 |
| XCF/KYF | 100 | 5900x5900x4200 | 1260/1260 | | 20-60 | 132/110/1.5 |
