gr2 gr5 gr9 gr12 titanium rod round hex shape dia10mm 25mm 30mm
length 3000mm
1. Product Information
| Item | gr2 gr5 gr9 gr12 titanium rod round hex shape dia10mm 25mm 30mm
length 3000mm |
Material | ASTM:GR1, GR2, GR3, GR4, GR5, GR6, GR7, GR9, GR11, GR12, etc.
GB: TA0, TA2, TA3, TA5, TA6, TA7, TA9, TA10, TB2, TC1, TC2, TC3,
TC4, etc. |
| Diameter: 0.1-600mm |
Length: 1m, 2m, 3m, 6m or as requirements. |
Technique | Hot Forged; Hot Rolled; Cold drawn. |
Application | Metallurgy, electronics, medical, chemical, petroleum,
pharmaceutical, aerospace, etc. |
A. Standard: ASTM B348, ASTM B381, AMS 4928.
B. Diameter size in stock: 3mm/6mm/8mm/10mm/20mm/30mm, length:
1000mm-6000mm, or cutting to your needed length
C. Shape: Round bar, square bar , hex bar
D. Feature: 1.Polished surface without any defects free from cracks
no pitting.
2.Two ends flatting making sure length tolerance and good looking.
F. Process: Hot forging-hot rolling-turning light (polishing)
Executive standard:
National standard: GB / 2965-2007, GB / T13810, Q / BS5331-91
American Standard: ASTM B348, ASTM F136, ASTM F67, AMS4928
Specifications: (Diameter * Length / mm): 8mm-250mm * L
Delivery status: hot processing status, annealing status
skills requirement
1. The chemical composition of titanium and titanium alloy bars
shall comply with the provisions of GB / T 3620.1, and when
repeated inspection is required, the allowable deviation of the
chemical composition shall comply with the provisions of GB / T
3620.2.
2. The diameter or side length of the hot-processed bar and its
allowable deviation should meet the requirements of Table 1.
3. After hot processing, the rods are cold-rolled (ground) and
cold-rolled. The allowable deviation of the diameter of the
cold-drawn rods should comply with industry regulations.
4. The out-of-roundness of the bar after turning (grinding) after
hot processing should be no more than half of its dimensional
tolerance.
5. The length of the indeterminate length of the processed bar is
300-6000mm, and the length of the annealed bar is 300-2000mm. The
length of the fixed length or double length should be within the
range of the length of the indefinite length. ; The length of the
double ruler should also be included in the cut amount of the bar,
each cut amount is 5mm. The fixed ruler or double ruler length
should be indicated in the contract.
Application
Aerospace, aviation, navigation, ships, seawater desalination,
petroleum, chemical industry, mechanical equipment, nuclear power
equipment, power equipment, automobile and motorcycle parts, sports
and leisure, medical parts, steel and metallurgy, high-tech fields.
Medical titanium rod
Specification: Rolling ￠ 8.0 --- 40mm × L; Forging ￠ 40 --- 150mm ×
L
Metallographic structure: The grain size of pure titanium is not
less than 5 grades, and the TC4 titanium alloy complies with A1-A9.
Surface: black leather surface, car polished surface, polished
surface (H11, H9, H8)
Medical titanium rod performance (refer to executive standard: GB /
T13810-2007, ASTM F67 / F136)
2. Physical Properties
| Physical Properties |
| Tensile Strength(min) | Yield Strength(min) | Elongation(%) |
| ksi | MPa | ksi | MPa |
| Grade 1 | 35 | 240 | 20 | 138 | 24 |
| Grade2 | 50 | 345 | 40 | 275 | 20 |
| Grade 3 | 65 | 450 | 55 | 380 | 18 |
| Grade 4 | 80 | 550 | 70 | 483 | 15 |
| Grade 5 | 130 | 895 | 120 | 828 | 10 |
| Grade 7 | 50 | 345 | 40 | 275 | 20 |
| Grade 9 | 90 | 620 | 70 | 483 | 15 |
| Grade 12 | 70 | 483 | 50 | 345 | 18 |
| Grade 23 | 120 | 828 | 110 | 759 | 10 |
3. Chemical requirements
| N | C | H | Fe | O | Al | V | Pd | Mo | Ni | Ti |
| Gr1 | 0.03 | 0.08 | 0.015 | 0.20 | 0.18 | / | / | / | / | / | bal |
| Gr2 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | / | / | / | bal |
| Gr5 | 0.05 | 0.08 | 0.015 | 0.40 | 0.20 | 5.5~6.75 | 3.5~4.5 | / | / | / | bal |
| Gr7 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | 0.12~0.25 | / | / | bal |
| Gr9 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.5~3.5 | 2.0~3.0 | / | / | / | bal |
| Gr12 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | / | 0.2~0.4 | 0.6~0.9 | bal |
| Titanium Round Bar |
| Diameter (Inches) | Appx. Weight Per Foot | Diameter (Inches) | Appx. Weight Per Foot |
| 0.1875 | .05 | 3.25 | 16.22 |
| 0.25 | .10 | 3.5 | 18.82 |
| 0.3125 | .15 | 3.75 | 21.60 |
| 0.375 | .22 | 4.0 | 24.58 |
| 0.4375 | .29 | 4.25 | 27.74 |
| 0.5 | .38 | 4.5 | 31.10 |
| 0.5625 | .48 | 4.75 | 34.01 |
| 0.625 | .60 | 5.0 | 37.68 |
| 0.6875 | .71 | 5.25 | 41.54 |
| 0.75 | .86 | 5.5 | 46.46 |
| 0.8125 | .99 | 5.75 | 49.83 |
| 0.875 | 1.18 | 6.0 | 55.30 |
| 0.9375 | 1.32 | 6.25 | 58.88 |
| 1.0 | 1.54 | 6.5 | 64.80 |
| 1.125 | 1.94 | 7.0 | 75.30 |
| 1.25 | 2.40 | 7.5 | 86.40 |
| 1.375 | 2.90 | 8.0 | 98.30 |
| 1.5 | 3.46 | 8.25 | 104.60 |
| 1.625 | 3.98 | 8.5 | 111.00 |
| 1.750 | 4.62 | 9.0 | 124.40 |
| 1.875 | 5.40 | 9.5 | 138.60 |
| 2.0 | 6.14 | 10.0 | 153.60 |
| 2.25 | 7.78 | 11.0 | 185.90 |
| 2.375 | 8.50 | 12.0 | 212.20 |
| 2.5 | 9.60 | 13.0 | 259.60 |
| 2.625 | 10.58 | 14.0 | 301.10 |
| 2.75 | 11.62 | 15.0 | 351.40 |
| 3.0 | 13.82 | 16.0 | 385.90 |
4. Production Process
Titanium rod processing Flow:
Titanium Sponge and master alloys → Compacting electrodes → Melting → Forging → Billets → Procision forging → Machining → Bars
5. Detailed Images
6. Related Product
7. Quality Assurance:
A. According to globally recognized standards, such as ASTM, AMS,
ASME. Provide third-party inspection reports. ISO Quality
Management System.
B. Visual inspection to check surface quality, ensuring without
flaw, black dot and other defects.
C. Chemical Composition making sure all chemical components can
satisfy customer’s demands.
D. Mechanical Property testing making sure all titanium products
have satisfying mechanical features before delivery.
8. FAQ
| FAQ |
| Q1.--How can you ensure the product quality? |
--All products are manufactured according to ASTM standard (Bolts
are according to ASME
standard and DIN standard),and we make 100% inspection before
shipment,also we can provide the MTC Material Test Certification. |
| Q2.--Can you print our LOGO on the products? |
| --Sure, and we welcome the customerized products. |
| Q3.--Can we get the free sample? |
| --Sure. |
| Q4.--What about the payment terms? |
| --T/T, L/C,Paypal,Western Union,Escrew and MoneyGram etc are all
accepted. |
| Q5.--Do you have your website? |
| --Yes, Please click here. http://www.metalstitanium.com(Independent website) |
| Q6.--What is the necessary information for a inquiry? |
--Product name, specification, material grade and quantity. If
customized products, your drawing and special requests also needed. |
