PSE300 SMC Pressure Sensor Controller
| Brand/Manufacturer | SMC /USA |
| Part Number | PSE300 |
| Alternate Part Number | PSE300 |
| Description | Pressure Sensor Controller |
| Dimennsions | 6.1cm x 6.5cm x 6.2cm |
| Weight | 0.30kg |
Product Details
Product specifications
1 Operate the controller with the specified voltage. Operation with
a voltage beyond specifications can cause malfunction or damage of
the pressure sensor controller. Insufficient supply voltage may not
drive a load due to a voltage drop inside the pressure sensor
controller.
Verify the operating voltage of the load before use.
2 Use the controller within the specified ranges of the measurement
flow rate and under the specified operating pressure. Otherwise it
can cause damage to the controller and an abnormal measurement.
3 Do not exceed the specified maximum allowable load. Otherwise it
can cause damage or shorten the lifetime of the pressure sensor
controller.
4 Reserve a space for maintenance. Remember to leave space for
maintenance when designing the piping plan.
5 The direct-current power supply to combine should use UL
authorization power supply which is the Class2 power supply based
on UL1310 or the power supply is using the transformer of a Class2
based on UL1585.
Output Specification
When the lead wire with SMC Power and Output Lead Wire (type
ZS-28-A) is used, the colors of wire (Brown, Black, White, Gray,
Blue) will apply as shown on circuit diagram.
NPN Open Collector Output 2 Outputs
Max. 30V, 80mA
Residual voltage 1V or less
Analog Output 1 to 5V
Output Impedance Approx.1kΩ
Auto shift function
In case the source pressure fluctuates too much, the controller may
not be able to operate normally. Auto shift is provided to
compensate for the fluctuation of the source pressure.
While measured pressure becomes standard pressure value when auto
shift input is received, this function correct set value of the
switches.
With Auto Shift
Set auto shift input as Lo at the time pressure source change, in
order to memorize the pressure change and to correct pressure set
value, so that correct decision emerge.
Conditions and explanations for auto shift function
1 Keep constant pressure for 5ms or more from the close signal of
auto shift input.
2 At auto shift input, the pressure at that time is memorized to
[C_5] as corrected value, and the switch operates with the value
which applied compensation value to setting value.
Display indicates [ooo] for approx.1 sec.
3 The switch set as auto shift mode at the time of initial setting
operates with the value which applied corrected value [C_5] to
setting value:
More Products
| RELIANCE | 57C404C | SIEMENS | 15377-4FM |
| RELIANCE | 57C405-E | SIEMENS | 3-424-2283A02 |
| RELIANCE | 586-501-109 | SIEMENS | 383VA21N1F |
| RELIANCE | 0-60007-2 | SIEMENS | 405-8ADC |
| RELIANCE | 0-60021-2 | SIEMENS | 505-4916A |
| RELIANCE | 0-60023-5 | SIEMENS | 6DD1670-0AF0 |
| SHNEIDER | 140DAO84000 | SIEMENS | 6DR2100-5 |
| SHNEIDER | 140NOM21200 | SAIA | PCD1.M110 |
| SHNEIDER | ATV61HD37N4 | SAIA | PCD2.C100 |
| SHNEIDER | TSXDSZ32R5 | SAIA | PCD2.K110 |
| SHNEIDER | TSXLES65 | SAIA | PCD3.W720 |
| SHNEIDER | 140ARI03010 | SAIA | PCD6.A4 |
Contact Us
miya@mvme.cn(Click)
Email: miya@mvme.cn
QQ: 2851195450
Tel: 86-18020776792
Skype: miyazheng52
